Kathrein UFS 940sw, Руководство по эксплуатации

Страница: 14 / 132

14
Connection and Setup
Make sure that your own satellite antenna system is equipped for digital reception
in the high-band range with at least one universal LNB.
The presets for the control signals have been made for standard reception systems, i.e. 14/18 V for
polarity reversal and 22 kHz switching signal for low/high band changeover.
For recording a programme you need an external USB storage medium
1)
(such as an external hard
disk with a USB connection), which you can connect to the USB 2.0 interface at the rear of the receiver.
The USB storage medium must be formatted in the format “FAT32” or “EXT2”. Instructions on how to
format an external USB storage medium can be found in the section “Mainmenu”, “Service menu”,
“USB Device Management”.
The USB storage medium that is connected may not have more than three
partitions, since the receiver cannot manage and use more than three partitions.
Please note that the current available from the receiver at the USB 2.0 port is limited
to only 500 mA. For some hard disks that is not suf
fi cient for correct operation.
In order to ensure the optimum power supply to the hard disk you can either use
an external hard disk with its own power supply or interpose a USB 2.0 hub with
its own power supply.
1)
Tested only with hard disks from the Kathrein product range (see also: www.kathrein.de → Service → FAQs)