Kathrein UFS 940sw, Руководство по эксплуатации

Страница: 96 / 132

96
After calling up the menu you will see
the following display:
The

buttons allow you to
select different sets of parameters for
the search.
In this menu you can selective search for
a frequency range for the new channels.
Mainmenu - Search Channel
You will be asked whether you wish to save the changes or not. Use the

buttons to make
the selection and con fi rm with the

button. If you select “Yes, save changes”, the newly found
channels will be added to the end of the channel list. Then press the

button to exit the menu.
The channel list is called up on to the TV screen by pressing the

button (see also the sections
“Basic Operation in TV or Radio Mode”, “On-Screen Displays”, “Channel List TV/Radio”).
After a search (of whatever type) the receiver shows all newly found channels in
the channel list under the heading “New Channels”.
You will
fi nd this rubric in the channel list at the end of the green overall list
(select using the

buttons).
Satellite
Use the

buttons to select the satellite on which the transponder you want to search is
located. Make sure your reception system is aligned to the selected satellite. You can only search one
transponder at a time. If you want to search several transponders on a satellite, you should start an
automatic search of the transmitting satellite.