Kathrein UFS 940sw, Руководство по эксплуатации

Страница: 94 / 132

94
After calling up the menu you will see
the following display:
You have three different search options:
- Automatic Channel Search
- Manual Channel Search
- Search with service ID
Use the

buttons to select the
desired search type and con fi rm your
selection using the

button.
After calling up the menu you will see
the following display:
The

buttons allow you to select
different sets of parameters for the
search.
Satellite
Using the

buttons, select the satellite to be searched. Make sure your reception system is
aligned to the selected satellite. You can search only one satellite at a time. If you have connected
a multi-feed reception system (e.g. reception of ASTRA 19.2° East and HOTBIRD 13° East),
you must repeat this procedure once for each satellite.
You can however start the fi rst installation again, in the course of which a channel search of all the
satellites you selected is performed.
Channel Search Mode
Use the

buttons to select the type of channels that are to be searched for. You have three
options:
Mainmenu - Search Channel
Automatic
Channel
Search All transponders for the satellite
you selected will be searched
Manual
Channel
Search Only the selected transponder
for the satellite you selected will
be searched
Search with
Service ID Search for a speci fi c channel
using its service ID