Kathrein UFS 940sw, Руководство по эксплуатации

Страница: 106 / 132

106
Mainmenu - Settings
Loop through in standby
Use the

buttons (On/Off), to select whether the satellite signal present at the input to the
receiver (IF input) should be looped through to the output from the receiver (IF output) when the receiver
is in standby mode.
After calling up the menu you will see
the following display:
The individual items are selected using
the

buttons. The changes to
the current settings can be performed
using the

buttons or the
number keys.
Local time offset (UTC)
Use the

buttons to set the time zone variation from UTC (formerly GMT) (e.g. for
G1 hour).
Use the

buttons to switch to the “Automatic clock change” fi eld.
Automatic clock change
Use the

buttons to select whether the receiver should automatically change over to and
from summer and winter time. If “On” is selected, the receiver automatically sets itself to the right time.
If you select the setting “Off”, you must make the change to and from summer time manually by setting
the “Summertime”
fi eld to “Yes” or “No”.
update time on
Use the

buttons here to select the channel from which the receiver will take the time
information. Either:
all Channels: The time information is taken from whatever channel is being viewed or
current Channel: The channel currently being viewed is speci fi ed as the supplier of time information.