Kathrein UFS 940sw, Руководство по эксплуатации

Страница: 21 / 132

21
Connection and Setup
Required buttons on remote control for fi rst installation:

...

Numerical input

(green)
Proceed to next step in
fi rst installation

(red)
Go back one step in the
fi rst installation

Con fi rm the changed
values/setting

Select/change individual
menu parameters, navigation

Cancel input, go back
Before you start to use the UFS 940sw, read the sections “Safety Instructions
- Important Information”, “Important Information” and “Connection and
Getting Started” through to the item “First Installation”.
Do not connect the unit to the mains until all installation work has been properly
carried out.
The guidance given in the “First Installation” item assumes that the receiver
has been properly connected as per the “Safety Instructions - Important
Information”, “Important Information” and “Connection and Getting Started”
through to the item “First Installation”.
First switch your TV set on and select the AV channel slot you have used to connect the UFS 940sw
to your TV set. Start the UFS 940sw by pressing the on/off switch on the rear panel. The following
display appears:
Use the

buttons to select
the desired menu language for your
receiver. The language selected will
be shown highlighted in yellow. The
following languages are available:
Always pay attention
to the bar at the bottom
of the on-screen
display. These provide
information on what to
do next.
German, English, French, Italian, Spanish, Czech, Dutch, Polish, Norwegian, Turkish and Russian.
Press the

(green) button to move to the next menu.