Kathrein UFS 940sw, Руководство по эксплуатации

Страница: 26 / 132

26
LNB Type (settings)
Here use the

buttons to select the LNB type used in your system. The selections available
are “Universal” and “user-de fi ned” (the selection “Wideband” is required only for single-cable feed
systems).
Universal:
No further input is required, since all necessary frequency ranges are covered by a universal LNB.
user-de fi ned:
If you choose not to use a universal LNB, you must here set the frequency ranges for which your LNB
was con
fi gured.
Use the

buttons to select the frequency range to be changed (low, high or limit frequency).
Use the

buttons or the numbers buttons to set the exact frequency for which your LNB was
con fi gured.
Test transponder
To check whether the settings that you have made are correct, use the

buttons to move to the
“Test transponder” fi eld. Use the

buttons to select the required transponder from the various
ones listed. If your settings are correct, you will see at the top right of the screen the live signal of
a channel from the currently selected transponder.
If you do not receive a signal, check your settings again and if necessary call for expert help.
You have now completed all settings for the fi rst satellite. Press the

button to return to the
“Satellite Selection Menu” and perform the settings in the same way for the remaining satellites.
When you have fi nished con fi guring the satellite, press the

(green) button. The receiver then
automatically calls up the selection menu for the channel search. Continue the fi rst installation by selecting
“Execute Channel search”.
Connection and Setup