Kathrein UFS 940sw, Руководство по эксплуатации

Страница: 104 / 132

104
Mainmenu - Settings
TV aspect ratio
Here you select the TV's picture format. Either
- 4:3 or
- 16:9
Picture format
Here you can select the type of screen
display, depending on the setting of your
TV format:
• Pan & Scan
• Letterbox
• Automatically (only if the “16:9” TV format
was selected)
• Always 16:9 (only if the “16:9” TV format
was selected)
Television System
Here you can select the TV standard you wish
to use.
- PAL
- NTSC
- MULTI
HDMI Format
Here you can select the picture resolution that
will be sent to your TV set. Either
- 1080i (resolution 1920 x 1080, half-screen
images)
- 576p (resolution 720 x 576, full-screen
images)
- 720p (resolution 1280 x 720, full-screen
images) or
- automatically
Show 4:3 event
Here you can select the type of screen display
mode for 4:3 broadcasts on a 16:9 TV set:
- normal (Pillarbox)
- stretched (Full screen)
- zoom in (Pan & Scan)
By pressing the

(green) button once or
twice you can also call up the settings for
“Show 4:3 event” and for “HDMI Format” whilst
viewing.
Audio format on HDMI
Here you can select the type of audio signal
that is transmitted by the HDMI interface.
Select the signal that your TV set can process.
- Decoded PCM
- S/PDIF format
TV standby via HDMI
If you select “Off”, the TV set must be switched
on or off separately. If you select “On”, the TV set
will be switched on automatically as the receiver
starts up (but only if the TV set was in stand-by
mode). If the receiver is switched off into stand-
by mode, the TV set will also be switched to
stand-by mode.
Automatically switching the TV set on/off by the
receiver is available only if the TV set supports
this function!
Auto Dolby Digital output
Here you can select whether the receiver should automatically output the Dolby Digital signal
(if this is transmitted).
Audio Delay (currently unavailable)
Here you can set a delay in milliseconds, if the sound output from your receiver is out of synch with the
TV picture (lip synchronicity). The delay can be set in 10 millisecond steps from 10 ms up to 200 ms.
Subtitle
Here you can select whether the receiver should automatically output the subtitles
(if these are transmitted).