Kathrein CAP 620, Оригинальное руководство по эксплуатации

Страница: 59 / 64

59 of 64
18 Change of location
After a minor
change of location the turntable moves to the last selected position and so quickly finds the
satellite again The following message appears whilst the turntable is moving:
Note
After a more substantial change of location it is recommended that you reset the system and enter the
location as described under 154, P53
As soon as the turntable has found the right satellite it saves its position so that it can find it more quickly
next time it starts up. The alignment of the turntable is then optimised automatically for the best signal
reception (fine adjustment). The picture can freeze temporarily whilst this is being done. If the search is
unsuccessful, the following message appears:
19 Park
You have the following options to "park" the antenna in the park position:
● Press the

button twice (on the remote control or the set)
● Press

(green button) Select with the

buttons "Move CAP to park position" and confirm with
the

button
● Switch the ignition on. The antenna automatically moves to the park position. Prerequisite: The green
core of the power supply cable is connected to the ignition and the turntable to the supply voltage (see
the connection diagram) Refer to the detailed instructions for this in the CAP unit installation manual
The following message appears whilst the antenna is moving into the park position: