27 of 64
7
Dismantling for servicing
If repairs to the system or individual components are necessary, contact your specialist dealer or our ser-
vice centre (see below for the address)
Caution
Never open the turntable yourself!!
7�1
Removal
Caution
Do not cut the cables! At the cable junction provided, disconnect the cables projecting
from the turntable from the two cables laid within the interior of the vehicle (unplug the
plug)
Note
Before exchanging the receiver you
must
first move the turntable to the park position.
●
The cables laid within the vehicle can remain there
● Unscrew the six M6 screws securing the turntable to the mounting plate.
●
Place two wooden supports on the vehicle roof for protection
●
Then place the turntable on the prepared wooden supports
●
To ship the turntable, use the original packaging which you have saved
●
Seal the opening in the vehicle roof appropriately to protect against the ingress of moisture
● If an HDZ 100 roof duct has been fitted and the equipment is then removed, the cable glands that are
no longer used should be sealed with the integral plugs The casing is then watertight once again
7�2
Address of the service centre
Factory repair centre
Regional repair centre
Katek Service GmbH
Philipsstraße 1
35576 Wetzlar, Germany
Tel:
+49 (0) 8641 9545-0
Fax:
+49 (0) 8641 9545-35 and -36
E-mail:
service-kathrein@katekde
KATHREIN Sachsen GmbH
Lindenstraße 3
09241 Mühlau, Germany
Tel:
+49 (0) 3722 6073-31
Fax:
+49 (0) 3722 6073-18
E-mail:
service@kathrein-sachsende
Main factory repair centre
CSS Caravan-Sat-Service GmbH
Bahnhofstr 110
83224 Grassau, Germany
Tel:
+49 (0) 8641 6998427
Fax:
+49 (0) 8641 6998429
E-mail:
service@css-grassaude
Содержание CAP 620
Страница 29: ...29 of 64 Longitude for the reception position...
Страница 36: ...36 of 64 Technical data 10 1 Dimensions mm Mounting plate 145 66...
Страница 62: ...62 of 64 21 Declaration of conformity...