Kathrein CAP 620, Оригинальное руководство по эксплуатации

Страница: 22 / 64

22 of 64
Installation and connection
564 Suspended installation
1 Remove the wood screws supplied from their transport attachment on the top of the respective mount-
ing piece (2 pieces)
2 Place the two mounting pieces on your
receiver as shown in Figures
①
–
③
During
the process the following should be taken into
account:
– Left (L) and right (R) markings (see the
arrows in Fig
②
)
– The teeth on the underside of the mounting
pieces must be inserted in the first and last
row of the ventilation slots on the top of the
receiver (see the arrows in Fig
①
)

2 3
Now hold the receiver, with the installation kit attached, at the
installation location Screw in the wood screws supplied through
the smaller holes in the screw socket area (x 4) (see Fig.
④
)
Wherever possible, use the wood screws supplied If these are
unsuitable, other screws of adequate size and strength can be
used
However, under no circumstances use countersunk
screws, since these can damage the attachment area (Fig�
⑤
)�
Then screw all four screws fully home, so that the installation kit is
no longer able to come free
For subsequent disassembly it is sufficient to undo all screws one
turn each and to push the receiver to the right (suspended) or left
(on top) to release it
4 Screw socket
Left
Right
5