Kamstrup MULTICAL 603, Техническое описание

Страница: 73 / 155

MULTICAL® 603
Kamstrup A/S ∙ Technical description ∙ 5512 ‐ 2029_A1_GB_06.2017 73
6.2.1 Module readings
The TECH loop includes a number of module readings which depend on the mounted module. These readings are
described in the respective technical descriptions for the modules. Simple modules, however, only include the primary
reading “Type/Config no.” (index number 2 ‐ 101 ‐ 00). If the meter is not fitted with a module, “Type/Config no.” is
displayed as “00000000”.
Note: Module readings can be empty due to delay or interrupted communication between meter and module. The
heart beat indication shows that both meter and display are active.
Index number in
display
Display reading Display reference
number
Type/Config no. 2 ‐ 101 ‐ 00 / 2 ‐ 201 ‐ 00 N
o
31
Firmware no./rev.
Firmware
1357 C1
2 ‐ 101 ‐ 01 / 2 ‐ 201 ‐ 01 N
o
32
Module serial number
No. 12345678
2 ‐ 101 ‐ 02 / 2 ‐ 201 ‐ 02 N
o
33
Primary address 2 ‐ 101 ‐ 03 / 2 ‐ 201 ‐ 03 N
o
34
M ‐ Bus secondary ID 2 ‐ 101 ‐ xx / 2 ‐ 201 ‐ xx
1
N
o
35
M ‐ Bus enhanced
secondary ID
2 ‐ 101 ‐ xx / 2 ‐ 201 ‐ xx
1
N
o
36
1
These readings depend on the module and are thus not fixed readings. The order of the readings can vary. Therefore,
the index number is set to “xx”. The reference number will, however, stay the same.