Full Digital Color Doppler Ultrasonic Diagnostic Instruments (Vet) User’s Manual V1.01
- 69 -
Chapter 11 Report
The report will be generated after you perform the specific measurements but not the general
measurements. It contains patient information, measurement results, findings and prompt.
11.1 Reviewing the Report
Press the
Report
key on the control panel to enter the Report screen. You can view the patient information
and measurements results. If the report has more than one page, you can click [Next] or[Prev] to turn to the
next or previous page.
11.2 Editing the Report
11.2.1 Entering Ultrasound Comments
In the report screen, you can input the diagnosis information in the textbox beside [Findings] and
[Prompt] by moving the trackball and press the
Set
key to confirm.
If [Findings] and [Prompt] are set in the report template, you can input corresponding information in
the report interface. For report preset, see "6.7 Preset of Report Template".
11.2.2 Adding Ultrasound Images
Image(s) saved in current exam can be added to the report.
1. In the report screen, click the [Add Image] to pop up the add image dialog box.
Left column: Image(s) saved in current exam.
Right column: Images selected to add into the report.
2. Select the image.
Click >, to add the selected image in the left column into the right column.
Click >>, to add all images in the left column into the right column.
Click <, to remove selected image in the right column.
Click <<, to remove all images in the right column.
Select an image in the right column and click [Move Up] or [Move Down] to adjust the image
sequence.
3. Click [OK] to confirm.
11.3 Saving the Report
The reports can be saved in PDF documents, which can be viewed and edited on a PC.
Click [SavePDF] in the Report screen to save the report.
11.4 Printing the Report
Ensure that the printer is connected well with the system before printing the report. For detailed description,
refer to Section 5.6.3 Connecting the graphic printer.
Click [Print] in the Report screen to print the report.