Kaco 1000335, Руководство пользователя

Страница: 40 / 91

Country-
spec. Set-
tings Men
u
level Display/
Setting Action in this menu/meaning
4 1 2 3 4
DHCP
On / Off
NOTE: The "IP address", "Subnet mask", "Gateway" and "DNS-Server"
menu options are only displayed with DHCP disabled.
F
Activate or deactivate DHCP.
On: Once the DHCP server becomes available, the IP address, subnet
mask, gateway and DNS server are automatically applied and the afore-
mentioned menu options are hidden.
Off: Apply settings manually.
4 1 2 3 4
IP address F Allocate a unique IPv4 address in the network.
4
1
2 3
IP address NOTE: The “IP address”, “Subnet masks”, “Gateway” and “DNS server”
menu items
are only displayed with DHCP disabled.
4 1 2 3 4
Subnet mask
F
Assign a subnet mask.
4 1 2 3 4
Gateway F Enter IPv4 address of the gateway.
4 1 2 3 4
DNS server F Enter IPv4 address of DNS server.
4 1 2 3 4
Web server F Open the menu: Press the
Right arrow button
or
Enter
button
.
4 1 2 3 4
Operation mode F Activate or disable the integrated web server.
4 1 2 3 4
Remote config
On / Off
F
If necessary, activate the remote configuration.
4 1 2 3 4
Remote update
On / Off
F
If necessary, activate the remote update.
4 1 2 3 4
Portal Connection test
Off | Meteocontrol |
User-defined 1-4:
↻ Your IT infrastructure must be adequately protected.
F Select operating mode.
Off: The connection to the portal is deactivated.
Meteocontrol: The device attempts to connect to the Webportal blue-
planet web of meteocontrol.
User defined 1-4: The device attempts to log on via a user-defined
portal that was set up by way of remote access.
4 1 2 3
4
Modbus TCP F Activate/disable function.
4 1 2 3 4
Activation NOTE: The menu options "Write access" and "Port" are only dis-
played with TCP activated.
1 Activate Modbus TCP.
4 1 2 3 4
Write access F Allow Modbus TCP write access.
4 1 2
3
4
Port F Set network port.
4 1 2 3 4
Connection status Indicates the status of the network connection.
4 1 2 3 4
Parameters F Press the
Right arrow button
or
Enter button
.
NOTE: The device does not display the "Parameters" menu in the
standard configuration. To display the Parameters menu:
1 Open the menu.
2 Simultaneously hold down the
Up
and
Down buttons
for sev-
eral seconds.
Powador 30.0-72.0 TL3 Page 40
EN