NOTE
Calculating efficiency by measuring the current and voltage values can lead to misleading results due to the
tolerances of the measurement devices. The purpose of these measured values is to monitor the basic op-
eration of the system.
9.4
Menu structure
Display on the LCD
1
2
3
4
Fig. 40:
Main menu
1
Selected menu option
3
Menu options in the active menu level
2
Name of the active menu level
4
Menu options of the next lower menu level
NOTE
The menu options displayed on screen are dependent on the country and network settings, and may vary
according to the type of device. Functions restricted to one or more countries are labelled with country
codes in accordance with ISO 3166-1.
Symbols used
4
1
2
3
4
Menu level (0,1,2,3)
Password-protected menu (password can be re-
quested from KACO customer service)
Display
Submenu
Option menu
Option box
Setting range
9.4.1
Menu
Country-
spec. Set-
tings
Men
u
level
Display/
Setting
Action in this menu/meaning
4
1
2
3
Desktop
F
Press
Right
arrow button.
4
1
2
3
4
Measured values
F
Open the menu: Press the
right arrow button
or the
OK
button
.
4
1
2
3
Generator
Displays the DC-side voltage, amperage and power.
4
1
2
3
Grid
Displays the AC-side voltage, amperage and power.
4
1
2
3
Power control
Displays the current value of the external power limitation by the grid
operator.
4
1
2
3
4
cos-phi
Displays the reactive power factor cos ϕ of the node.
4
1
2
3
Unit temperature
Displays the temperature inside the housing.
4
1
2
3
Yield counter
Displays the yield in kWh.
F
Reset the counter using the
RESET
button.
Powador 30.0-72.0 TL3
Page 37
EN
