manualshive.com logo in svg

Juniper JUNOSE, Руководство по настройке

Конфигурационное руководство Juniper JUNOSE - это бесплатный мануал, который поможет вам настроить ваш продукт наилучшим образом. Скачайте его с manualshive.com и следуйте инструкциям для оптимальной работы вашего устройства.

Поделиться
Скачать
background image

VPN-IPv4

address...............................................................378
exchanging addresses.........................................437

VPN-IPv4 address family..............................43, 153, 374
VPN-IPv6 address family..............................43, 153, 374
VPNs (virtual private networks

BGP/MPLS hub-and-spoke example.....................419

VPNs (virtual private networks)

BGP/MPLS...........................................................376
BGP/MPLS fully meshed example........................416
carrier-of-carriers................................................469
carrier-of-carriers IPv4........................................463
configuring VPN topologies with route

targets.............................................................400

default route to shared interface.........................456
ECMP..................................................................432
fallback global.....................................................428

example......................................................457

full-mesh VPN topologies, configure with route

targets.............................................................400

hierarchical.........................................................463
providing Internet access....................................455
secondary routing table lookup...........................428
static routes to shared IP interface......................461
traffic flow from Internet to VPN.........................461
traffic flow from VPN to Internet.........................455

VPWS (virtual private wire service L2VPNs)

address families, configure.................................658
BGP signaling, configuring..................................658
BGP/MPLS VPNs..................................................643
CE (customer edge device)..................................642
clear

BGP reachability..........................................666
BGP route flap dampening...........................666
BGP wait for end-of-RIB marker...................666

components........................................................642
configuration example........................................660
configure

address families...........................................658
BGP signaling...............................................658
L2VPN instances..........................................653
L2VPN interfaces.........................................655
MPLS LSPs...................................................659
sample topology..........................................660

features supported..............................................649
instances

configure.....................................................653
overview......................................................639

interfaces

configure.....................................................655

L2VPN address family.........................................643
module support..................................................649
monitor

BGP-related settings.....................................667
L2VPN-specific settings................................673
MPLS-related settings...................................680

MPLS, configure..................................................659
network interfaces

overview......................................................643

overview.............................................................639
PE (provider edge router)....................................643
platform considerations......................................649
prerequisites.......................................................651
references...........................................................650
VPWS address family..................................643, 658

VPWS address family...................43, 153, 374, 643, 658
VRF (VPN routing and forwarding instance)...............377

carrier-of-carriers................................................468
exporting imported routes..................................424
exporting routes to global BGP non-VPN routing

table................................................................424

importing routes.................................................424
routes, exporting and importing.........................420

W

weights, BGP neighbor...............................................112

assign with neighbor weight command...............112
assigning with access list....................................112
assigning with filter list.......................................112
assigning with route maps..................................112

702

■

Index

JUNOSe 11.0.x BGP and MPLS Configuration Guide

Содержание JUNOSE



































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE

M-Audio Wayoutware TimewARP 2600 User Manual preview
Wayoutware TimewARP 2600
Бренд: M-Audio Страницы: 49
Allied Telesis AT-9400 User Manual preview
AT-9400
Бренд: Allied Telesis Страницы: 668
Red Hat ENTERPRISE LINUX 3 - SECURITY GUIDE Manual preview
ENTERPRISE LINUX 3 - SECURITY GUIDE
Бренд: Red Hat Страницы: 410
RSA Security RSA RADIUS Server 6.1 Administrator'S Manual preview
RSA RADIUS Server 6.1
Бренд: RSA Security Страницы: 118
Vonamic 703100 Configuration Manual preview
703100
Бренд: Vonamic Страницы: 31
M-Audio Torq User Manual preview
Torq
Бренд: M-Audio Страницы: 88
Intel IT DIRECTOR Manual preview
IT DIRECTOR
Бренд: Intel Страницы: 43
Bay Networks FastLink II User Manual preview
FastLink II
Бренд: Bay Networks Страницы: 112
Mackie DIGITAL XBUS - SOFTWARE Installation Manual preview
DIGITAL XBUS - SOFTWARE
Бренд: Mackie Страницы: 8
Xerox DocuColor 30 Pro Manual preview
DocuColor 30 Pro
Бренд: Xerox Страницы: 292
DAVIS WeatherLink APRS Addendum preview
WeatherLink APRS
Бренд: DAVIS Страницы: 8
Asus W5FE User Manual preview
W5FE
Бренд: Asus Страницы: 92
Lenovo ThinkPad R61 Brochure preview
ThinkPad R61
Бренд: Lenovo Страницы: 4
Lenovo ThinkPad R61 Hardware Maintenance Manual preview
ThinkPad R61
Бренд: Lenovo Страницы: 254
Cisco 6.x and 7.0 Integration Notes preview
6.x and 7.0
Бренд: Cisco Страницы: 4
Watchguard Firebox V10 End User Manual preview
Firebox V10
Бренд: Watchguard Страницы: 8
MACROMEDIA FLASH 8-FLASH Reference preview
FLASH 8-FLASH
Бренд: MACROMEDIA Страницы: 162
Casio USB MIDI DRIVER Manual preview
USB MIDI DRIVER
Бренд: Casio Страницы: 22

Бренды по названию

Популярные бренды

Загрузить еще бренды