manualshive.com logo in svg

Juniper JUNOSE, Руководство по настройке

Конфигурационное руководство Juniper JUNOSE - это бесплатный мануал, который поможет вам настроить ваш продукт наилучшим образом. Скачайте его с manualshive.com и следуйте инструкциям для оптимальной работы вашего устройства.

Поделиться
Скачать
background image

customer edge (CE) device.........................................376
customer support.....................................................xxxv

contacting JTAC.................................................xxxv

D

data path failure

detecting RSVP-TE..............................................252

deaggregation, LDP FEC.............................................277
debug commands

debug ip bgp.......................................................158
debug ip mbgp....................................................481
undebug ip bgp...................................................197
undebug ip mbgp................................................498

default routes

BGP routing..........................................................55

default-fields commands

default-fields peer...............................................158
default-fields route..............................................158

default-information originate command...............56, 409
detecting RIP data path failure...................................252
disable-dynamic-redistribute command.......................54
discovery, LDP

basic...................................................................236
extended.............................................................236

distance bgp command..............................................137
documentation set

comments on....................................................xxxv

domain, VPLS............................................................570
domain-id command..................................................480
domain-tag command................................................481
dont-install-routes command.....................................478
DS-BGP routers..........................................................470
dual-stack BGP routers...............................................470
dynamic capability negotiation..................................126
dynamic interfaces, created by MPLS.........................220
dynamic peering, BGP..................................................43
dynamic peers, remove BGP........................................43
dynamic route redistribution, disabling in BGP............54
dynamically learned defaults........................................55

E

E-LSP.................................................................204, 299
EBGP (external Border Gateway Protocol)

updates in indirectly connected networks.............31

echo reply packets, MPLS...........................................235
echo request packets, MPLS.......................................235
ECMP (equal-cost multipath)

BGP.....................................................................432
BGP/MPLS VPNs..........................................374, 432
MPLS indirect next hops.....................................374
path failures in BGP/MPLS VPNs.........................374
pruning failed paths............................................374

enable a protocol

BGP routing..................................................17, 432

enable protocols

BGP routing........................................................658

encapsulations

ATM AAL0...........................................................511
ATM AAL05.........................................................510

equal-cost multipath support on MPLS.......................233
Ethernet aggregation and Martini layer 2

transport................................................................534

Ethernet raw mode encapsulation

overview.............................................................516

Ethernet/VLAN over MPLS (Multiprotocol Label

Switching)

configuration steps.............................................527
overview.............................................................503

exit-address-family

command.................................45, 155, 437, 594, 659

explicit null label, advertise the..................................211
export map

setting the BGP/MPLS VPN..................................420
use......................................................................423

export map command...............................................424
extended communities

BGP.................................................................11, 97
route target.........................................................379

external administrative distance, BGP........................136
external BGP

EBGP.......................................................................6

external-paths command...........................................404

F

F4 OAM cells

not carried on the same pseudowire as data cells

unopened OAM circuits ..............................520

F5 Operations Administration and Maintenance (OAM)

cells

and transmission of data cells over the same

pseudowire

same VCI/VPI values as the data cells..........520

fast reroute extension, MPLS......................................284
FEC aggregation, LDP.................................................277
FEC deaggregation, LDP.............................................277
filter BGP/MPLS VPN routes........................................404
filter lists, BGP....................................................112, 172
four-octet AS number capability.................................126
Frame Relay

over MPLS...........................................................503

configuration example.................................538

full-mesh VPNs, configure with route targets..............400

G

global export map

and IPv6.............................................................426
setting the BGP/MPLS VPN..................................420
use......................................................................424

690

■

Index

JUNOSe 11.0.x BGP and MPLS Configuration Guide

Содержание JUNOSE



































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE

Canon PowerShot SD10 Digital ELPH Software Starter Manual preview
PowerShot SD10 Digital ELPH
Бренд: Canon Страницы: 124
Blackberry MAIL - BROWSING SMARTPHONE User Manual preview
MAIL - BROWSING SMARTPHONE
Бренд: Blackberry Страницы: 25
Novell ZENworks 7.2 Linux Management Manual preview
ZENworks 7.2 Linux Management
Бренд: Novell Страницы: 10
Sanyo VA-SW8000 Instruction Manual preview
VA-SW8000
Бренд: Sanyo Страницы: 132
AMIGOPOD AMIGOPOD 0.99.35 Integration Manual preview
AMIGOPOD 0.99.35
Бренд: AMIGOPOD Страницы: 23
AMIGOPOD AMIGOPOD Integration Manual preview
AMIGOPOD
Бренд: AMIGOPOD Страницы: 47
Avermedia A16AR User Manual preview
A16AR
Бренд: Avermedia Страницы: 97
Better Light ViewFinder 7 User Manual preview
ViewFinder 7
Бренд: Better Light Страницы: 99
UNIBLUE DRIVERSCANNER Quick Start Manual preview
DRIVERSCANNER
Бренд: UNIBLUE Страницы: 3
Genius W POINTER How To Use preview
W POINTER
Бренд: Genius Страницы: 3
Genius G-Pen M712X Brochure & Specs preview
G-Pen M712X
Бренд: Genius Страницы: 2
Genius VIDEOCAM SLIM USB2 Manual preview
VIDEOCAM SLIM USB2
Бренд: Genius Страницы: 4
Genius F610 User Manual preview
F610
Бренд: Genius Страницы: 11
CAKEWALK REVALVER Manual preview
REVALVER
Бренд: CAKEWALK Страницы: 18
IBM WebSphere Adapters User Manual preview
WebSphere Adapters
Бренд: IBM Страницы: 226
Xerox FREEFLOW 701P47393 User Manual preview
FREEFLOW 701P47393
Бренд: Xerox Страницы: 32
Waves Plug-in for Vocals and Monophonic User Manual preview
Plug-in for Vocals and Monophonic
Бренд: Waves Страницы: 20
Canon Pull Print Service Provider Version 1.0... User Manual preview
Pull Print Service Provider Version 1.0...
Бренд: Canon Страницы: 54

Бренды по названию

Популярные бренды

Загрузить еще бренды