manualshive.com logo in svg

Juniper JUNOSE, Руководство по настройке

Конфигурационное руководство Juniper JUNOSE - это бесплатный мануал, который поможет вам настроить ваш продукт наилучшим образом. Скачайте его с manualshive.com и следуйте инструкциям для оптимальной работы вашего устройства.

Поделиться
Скачать
background image

V

VCC (virtual channel connection) cell relay

encapsulation, ATM

configuring..........................................................530
overview.............................................................511

VCI/VPI ranges

configuration dependent on

associating the ATM port with the

pseudowire..............................................521

configuration for multiple VCs transmission

activated, deactivated..................................521

requirements for configuration of

for multiple ATM VCs transportation............521

VEs (VPLS edge devices).............................................570
virtual channel connection. 

See 

 VCC cell relay

encapsulation

virtual private LAN service. 

See 

 VPLS (virtual private

LAN service)

Virtual Private Wire Service. 

See 

 VPWS (virtual private

wire service L2VPNs)

virtual-router command.............................................431
VPI/VCI ranges

configuring for multiple VCs transport

guidelines to be followed.............................519

configuring using

the mpls-relay atm vpi-range

command................................................519

matching configurations

on both sides of the pseudowire for multiple

VCs transmission.....................................519

maximum number supported

for multiple VCs transport over a single

pseudowire..............................................519

mismatching configurations

on both sides of the pseudowire for multiple

VCs transmission.....................................519

number of ATM VCs in the specified configuration

and scaling limit of the SAR device..............519

VPLS (virtual private LAN service)

BGP-based

address families, configuring.......................594
BGP signaling, configuring...........................594
BGP/MPLS VPNs...........................................573
configuration example.................................595
configuration tasks for BGP signaling...........584
L2VPN address family..........................573, 594
loopback interface and router ID,

configuring...............................................592

monitoring BGP-related settings..................625
sample topology, configuring.......................595
signaling overview.......................................573
VPLS address family............................573, 594
VPLS instances for BGP signaling,

configuring...............................................584

CEs (customer edge devices)...............................570

clear

BGP attributes..............................................610
BGP reachability..........................................610
BGP route flap dampening...........................610
BGP wait for end-of-RIB marker...................610
forwarding tables.........................................609
LDP attributes..............................................610

configure

MPLS LSPs...................................................593
subscriber policies.......................................589
VPLS instances............................................587
VPLS network interfaces..............................588

features supported..............................................579
forwarding tables

clearing........................................................609
overview......................................................571

instances

overview......................................................569

LDP-based

configuration example.................................602
configuration tasks for LDP signaling...........599
LDP signaling, configuring...........................601
loopback interface and router ID,

configuring...............................................592

monitoring LDP-related settings...................630
sample topology, configuring.......................602
signaling overview.......................................573
VPLS instances for LDP signaling,

configuring...............................................600

module support..................................................579
monitor

bridging-related settings..............................611
MPLS-related settings...................................631
statistics baselines.......................................608
VPLS-specific settings..................................632

multihoming.......................................................574
network interfaces

configuring..................................................588
module support...........................................579
overview......................................................570
subscriber policies.......................................589

platform considerations......................................579
prerequisites.......................................................583
references...........................................................580
subscriber policies on.........................................589
transparent bridging, comparison to...................571
transport virtual router, configure.......................584
VEs (VPLS edge devices).....................................570
virtual core interfaces

module support...........................................579
overview......................................................570

VPLS domains.....................................................570

VPLS address family.....................43, 153, 374, 573, 594
VPLS edge devices. 

See 

 VEs

Index

■

701

Index

Содержание JUNOSE



































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE

Xerox 850DP - Phaser Color Solid Ink Printer Installation Instructions preview
850DP - Phaser Color Solid Ink Printer
Бренд: Xerox Страницы: 2
Waves ABBEY ROAD THE KING'S MICROPHONES User Manual preview
ABBEY ROAD THE KING'S MICROPHONES
Бренд: Waves Страницы: 16
IBM E02D1LL-E - Rational Rose Enterprise Installation Manual preview
E02D1LL-E - Rational Rose Enterprise
Бренд: IBM Страницы: 46
Autodesk LANDXPLORER 2011 - SYSTEM REQUIREMENTS Manual preview
LANDXPLORER 2011 - SYSTEM REQUIREMENTS
Бренд: Autodesk Страницы: 3
3Com pcXset - NBX - PC Getting Started Manual preview
pcXset - NBX - PC
Бренд: 3Com Страницы: 26
MINOLTA-QMS Crown Document Option Commands Reference Manual preview
Crown Document Option Commands
Бренд: MINOLTA-QMS Страницы: 134
MACROMEDIA BREEZE 5 Installation And Configuration Manual preview
BREEZE 5
Бренд: MACROMEDIA Страницы: 100
HighPoint RAID Managemen Interface Manual preview
RAID Managemen
Бренд: HighPoint Страницы: 28
Igo IGO - Quick Start Manual preview
IGO -
Бренд: Igo Страницы: 12
Canon PowerShot A520 Manual preview
PowerShot A520
Бренд: Canon Страницы: 107
JVC GY-HM700U - Prohd Compact Shoulder Solid State Camcorder Manual preview
GY-HM700U - Prohd Compact Shoulder Solid State Camcorder
Бренд: JVC Страницы: 780
3D Nord magicolor 2590MF Reference Manual preview
magicolor 2590MF
Бренд: 3D Nord Страницы: 198
HP ProBook 5320m - Notebook PC User Manual preview
ProBook 5320m - Notebook PC
Бренд: HP Страницы: 147
HP PROBOOK 4425S Quickspecs preview
PROBOOK 4425S
Бренд: HP Страницы: 38
HP ProBook 4325s - Notebook PC Maintenance And Service Manual preview
ProBook 4325s - Notebook PC
Бренд: HP Страницы: 160
HP ProBook 4525s - Notebook PC User Manual preview
ProBook 4525s - Notebook PC
Бренд: HP Страницы: 102
HP ProBook 5330m Brochure preview
ProBook 5330m
Бренд: HP Страницы: 4
HP ProBook 5330m Maintenance And Service Manual preview
ProBook 5330m
Бренд: HP Страницы: 133

Бренды по названию

Популярные бренды

Загрузить еще бренды