manualshive.com logo in svg

Juniper JUNOSE, Руководство по настройке

Конфигурационное руководство Juniper JUNOSE - это бесплатный мануал, который поможет вам настроить ваш продукт наилучшим образом. Скачайте его с manualshive.com и следуйте инструкциям для оптимальной работы вашего устройства.

Поделиться
Скачать
background image

explicit path

configured...................................................226
configuring dynamic....................................277
defining configured......................................276
dynamic......................................................226

explicit routing....................................................226
fast reroute extensions........................................284
fast reroute on SONET/SDX interfaces................286
features, supported.............................................206
FEC ....................................................................202
flooding frequency..............................................238
flooding thresholds.............................................238
forwarding equivalency class......................202, 209
glossary..............................................................203
hard-state protocol..............................................229
implicit null label................................................211
interface label space...........................................212
L2VPNs, configure VPWS....................................659
label distribution protocols

BGP.............................................................229
LDP.............................................................229
RSVP-TE......................................................229

label-switching router..........................................210
labels..........................................................209, 210

explict null...................................................211
implicit null..................................................211
spaces..........................................................212
stacking.......................................................211
swapping.....................................................211

layer 2 services over...........................................503
LDP. 

See 

 LDP (Label Distribution Protocol)

local cross-connects............................507, 514, 532
loose hop............................................................226
LSP (label-switched path)

backup.........................................................238
configure for VPWS L2VPNs........................659
configuring for VPLS....................................593
explicit path.................................................226

LSR (label-switching router)................................210
major interface statistics.....................................557
message ack object.............................................231
message ID object...............................................231
monitoring..........................................................311
node...................................................................210
objects, RSVP-TE.................................................231
ordered control...................................................218
OSPF, configuring.......................................291, 292
overview.....................................................201, 209
path options for backup......................................238
penultimate hop popping....................................211
platform considerations......................................207
platform label space............................................212
preemption.........................................................238
reachability, verify and troubleshoot...................235
refresh messages................................................231
resource requirements........................................238

resources, configuring.........................................238
route pinning......................................................238
RSVP-TE. 

See 

 RSVP-TE (Resource Reservation

Protocol with traffic engineering extensions)

S bit....................................................................213
shim header........................................................213
shim interfaces, configuring........................509, 528
soft-state protocol.......................................229, 231
srefresh messages...............................................231
stacking labels....................................................211
statistics..............................................................312
statistics, major interface....................................557
strict hop............................................................226
summary refresh messages................................231
swapping labels..................................................211
switching labels..................................................210
switching vs routing............................................209
TLVs for ping......................................................235
topology-driven LSPs..........................................241
trace network connections..................................235
traffic engineering...............................................238

for backup...................................................238
tracking resources.......................................238

TTL bits...............................................................213
TTL processing....................................................213
TTL rules for expiration.......................................217
tunnel endpoint

announcement............................................220
definition.....................................................218

tunnel metric for backup.....................................238
tunnel models for differentiated services............253
ultimate hop popping..........................................211
upstream node....................................................218
VPI/VCI and labels...............................................212
VPLS, configuring LSPs for..................................593
VPNs

BGP/MPLS....................................................376

weight.................................................................238

See also 

 layer 2 services over MPLS; LDP; RSVP-TE

mpls commands........................................................265

mpls...........................................265, 270, 593, 659
mpls atm vci range.............................................270
mpls atm vpi range.............................................270
mpls backup-path...............................................285
mpls bandwidth..................................................271
mpls classifier-list................................................303
mpls create-dynamic-interfaces..................220, 265
mpls diff-serv phb-id traffic-class........................303
mpls disable........................................................270
mpls explicit-path...............................................276
mpls ip propagate-ttl...........................................265
mpls l2-transport load-balancing-group...............536
mpls lsp no-route retries.....................................268
mpls lsp no-route retry-time...............................268
mpls lsp retries...................................................268
mpls lsp retry-time..............................................265

694

■

Index

JUNOSe 11.0.x BGP and MPLS Configuration Guide

Содержание JUNOSE



































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE

Garmin GPSMAP GPSMAP 196 Getting Started preview
GPSMAP GPSMAP 196
Бренд: Garmin Страницы: 4
Garmin MapSource Owner'S Manual preview
MapSource
Бренд: Garmin Страницы: 2
Juniper RESIDENT CONSULTANT Datasheet preview
RESIDENT CONSULTANT
Бренд: Juniper Страницы: 4
TC Electronic Tap Factory Product Manual preview
Tap Factory
Бренд: TC Electronic Страницы: 12
Tech Source RAPTOR 2100 FPS - RAPTOR DRIVERS FOR HP-UX INSTALLATION AND Installation And Reference Manual preview
RAPTOR 2100 FPS - RAPTOR DRIVERS FOR HP-UX INSTALLATION AND
Бренд: Tech Source Страницы: 36
ScanSoft PaperPort Manual preview
PaperPort
Бренд: ScanSoft Страницы: 33
Microtek ScanWizard Pro Reference Manual preview
ScanWizard Pro
Бренд: Microtek Страницы: 177
Siemens IEEE802.11 Tutorial preview
IEEE802.11
Бренд: Siemens Страницы: 84
Red Hat CERTIFICATE SYSTEM 6.0 - MIGRATION GUIDE Manual preview
CERTIFICATE SYSTEM 6.0 - MIGRATION GUIDE
Бренд: Red Hat Страницы: 76
Polycom Conference Composer User Manual preview
Conference Composer
Бренд: Polycom Страницы: 29
Red Hat APPLICATION STACK 1.1 RELEASE Release Note preview
APPLICATION STACK 1.1 RELEASE
Бренд: Red Hat Страницы: 30
AVG RESCUE CD - FOR WINDOWS V 85.2 User Manual preview
RESCUE CD - FOR WINDOWS V 85.2
Бренд: AVG Страницы: 83
AVG ANTI-VIRUS BUSINESS EDITION 2011 - REV 2011.01 User Manual preview
ANTI-VIRUS BUSINESS EDITION 2011 - REV 2011.01
Бренд: AVG Страницы: 128
VBrick Systems ENTERPRISE MEDIA SYSTEM V5.0 User Manual preview
ENTERPRISE MEDIA SYSTEM V5.0
Бренд: VBrick Systems Страницы: 76
3Com 3CWXPGS - AirProtect RF Planning Tool User Manual preview
3CWXPGS - AirProtect RF Planning Tool
Бренд: 3Com Страницы: 122
Autodesk 15606-011408-9330 - MAPGUIDE R6.3 SITE LIC-UPG R6 Developer'S Manual preview
15606-011408-9330 - MAPGUIDE R6.3 SITE LIC-UPG R6
Бренд: Autodesk Страницы: 94
Bay Networks BayRS Notice preview
BayRS
Бренд: Bay Networks Страницы: 104
Ulead MEDIASTUDIO PRO 6.0 User Manual preview
MEDIASTUDIO PRO 6.0
Бренд: Ulead Страницы: 360

Бренды по названию

Популярные бренды

Загрузить еще бренды