manualshive.com logo in svg

Juniper JUNOSE, Руководство по настройке

Конфигурационное руководство Juniper JUNOSE - это бесплатный мануал, который поможет вам настроить ваш продукт наилучшим образом. Скачайте его с manualshive.com и следуйте инструкциям для оптимальной работы вашего устройства.

Поделиться
Скачать
background image

AS number

advertising prefixes with duplicate..............445
using for all CE sites.....................................441

BGP advertising rules for routes..........................455
BGP sessions, configuring...................................438
customer edge device.........................................376
data transport.....................................................384
default route to shared interface.........................456
ECMP..........................................................374, 432
ECMP indirect next hops.....................................374
export list...........................................................379
export map, setting the.......................................420
extended community, route target......................379
fallback global.....................................................428
fallback global example..............................457, 459
fast reconvergence..............................................448
filtering routes....................................................404
full mesh VPN.....................................................416
global export map

example......................................................462
IPv6 VPN routes...........................................426
setting the....................................................420

global import map to import specific routes.......458
hub-and-spoke VPN............................................418
IGP routes, advertising........................................439
IGPs, configuring on VRF....................................430
import list...........................................................379
import map, setting the......................................420
inter-AS (interprovider) services

IPv4.............................................................391
IPv6.............................................................399

interaction with OSPF.........................................473
intra-AS services

IPv4.............................................................384
IPv6.............................................................389

IPv6 over IPv4....................................................470
L2VPNs and........................................................643
L2VPNs, configuring...........................................658
label-switching routers........................................376
labeled and unlabeled routes, sending................451
labeled unicast routes, processing.......................454
labeled VPN routes, processing...........................454
maximum number of external best paths for route

target filtering..................................................404

maximum routes................................................446
monitoring..........................................................481
MP-Reach-NLRI attribute.....................................380
MP-Unreach-NLRI attribute.................................381
MPLS labels.........................................................384
next hops, check reachability..............................448
OSPF backdoor link....................................473, 476
OSPF configuration.............................................478
OSPF domain identifier attribute........................473
OSPF route type attribute...................................473

OSPF routes

distributing between PEs.............................473
distributing from CE to PE...........................473
distributing from PE to CE...........................473

OSPF routing information, preserving.................473
OSPF routing loops, preventing..........................473
overriding AS number for CE sites......................441
parent VR, peering with VRF...............................448
path failure, ECMP..............................................374
peering between VRF and parent VR..................448
platform considerations......................................383
provider core routers..........................................376
provider edge routers..........................................376
providing Internet access....................................455
pruning failed ECMP paths..................................374
reachability of next hops.....................................448
route distinguisher..............................................379
route processing by BGP.....................................454
route reachability information............................404
route target

configuring VPN topologies..........................400
defining.......................................................416

route-target extended community.......................404
route-target filtering............................................404
route-target filtering, disabling............................430
route-target membership attribute......................404
routing loops, preventing....................................441
RT-MEM-NLRI attribute.......................................404
RT-MEM-NLRI routing updates............................404
secondary routing table lookup...........................428
setting maximum route limits.............................446
sham link, OSPF.................................................473
site-of-origin to prevent routing loops.................441
static routes to shared IP interface......................461
static routes, advertising.....................................438
traffic flow from Internet to VPN.........................461
traffic flow from VPN to Internet.........................455
transporting packets...........................................384
troubleshooting...................................................481
unlabeled unicast routes, processing...................454
update message enhancement............................380
VPLS...................................................................573
VPLS, configuring................................................594
VPN services, configuring...................................412
VPN topologies, configuring with route

targets.............................................................400

full-mesh......................................................400
hub-and-spoke.............................................401
overlapping..................................................402

VPN-IPv4 address...............................................379
VPNs between ASs

IPv4.............................................................391
IPv6.............................................................399

688

■

Index

JUNOSe 11.0.x BGP and MPLS Configuration Guide

Содержание JUNOSE



































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE

Navitar 12X Zoom Instruction Manual preview
12X Zoom
Бренд: Navitar Страницы: 23
Xerox 850DP - Phaser Color Solid Ink Printer Installation Instructions preview
850DP - Phaser Color Solid Ink Printer
Бренд: Xerox Страницы: 2
Juniper JUNOS PUS MOBILE SECURITY SUITE Datasheet preview
JUNOS PUS MOBILE SECURITY SUITE
Бренд: Juniper Страницы: 6
Nortel CC MIS User Manual preview
CC MIS
Бренд: Nortel Страницы: 374
NeatWorks NeatWorks For Mac Using Manual preview
NeatWorks For Mac
Бренд: NeatWorks Страницы: 33
Pioneer Serato Flip User Manual preview
Serato Flip
Бренд: Pioneer Страницы: 11
Sony MSSW-IC2 User Manual preview
MSSW-IC2
Бренд: Sony Страницы: 2
Sony ICDBM1 - Memory Stick Media Digital Voice Recorder Supplementary Manual preview
ICDBM1 - Memory Stick Media Digital Voice Recorder
Бренд: Sony Страницы: 1
Sony ICDBM1 - Memory Stick Media Digital Voice Recorder Specifications preview
ICDBM1 - Memory Stick Media Digital Voice Recorder
Бренд: Sony Страницы: 2
Sony ICD-BP150 - Ic Recorder Specifications preview
ICD-BP150 - Ic Recorder
Бренд: Sony Страницы: 2
Sony D-NS921F - Portable Cd Player Specifications preview
D-NS921F - Portable Cd Player
Бренд: Sony Страницы: 2
Sony MS Export User Manual preview
MS Export
Бренд: Sony Страницы: 9
Sony Music Box v.2.1.0 Manual preview
Music Box v.2.1.0
Бренд: Sony Страницы: 12
Sony Memory Stick Autorun v1.3 Operating Instructions Manual preview
Memory Stick Autorun v1.3
Бренд: Sony Страницы: 24
Sony ICD-R100 Operating Instructions (primary manual) Service Manual preview
ICD-R100 Operating Instructions (primary manual)
Бренд: Sony Страницы: 22
Sony ICD-BP100 - Ic Recorder Service Manual preview
ICD-BP100 - Ic Recorder
Бренд: Sony Страницы: 32
Sony Image Converter 2 Plus Operating Instructions Manual preview
Image Converter 2 Plus
Бренд: Sony Страницы: 40
Sony Emma User Manual preview
Emma
Бренд: Sony Страницы: 34

Бренды по названию

Популярные бренды

Загрузить еще бренды