Juniper JUNOSE, Руководство по настройке

Страница: 499 / 738

Figure 106: Global Export Map Applied to Routes Exported from VRF BGP RIB
The following commands configure the route map and global export map:
host1(config)#v irtual-router pe1
host1:pe1(config)# access-list dot-one permit 0.0.0.1 255.255.255.0
host1:pe1(config)# route-map globxmap1
host1:pe1(config-route-map)# match ip address dot-one
host1:pe1(config-route-map)# set local-pref 200
host1:pe1(config-route-map)# exit
host1:pe1(config)# ip vrf pe11
host1:pe1(config-vrf)# rd 100:1
host1:pe1(config-vrf)# route-target both 100:1
host1:pe1(config-vrf)# global export map globxmap1
host1:pe1(config-vrf)# exit
Carrier-of-Carriers IPv4 VPNs
A carrier-of-carriers VPN is a two-tiered relationship between a provider carrier and
a customer carrier. In a carrier-of-carriers VPN, the provider carrier provides a VPN
backbone network for the customer carrier (Tier 1). The customer carrier, in turn,
provides layer 3 VPN or Internet services to its end customers (Tier 2).
This section provides the background you need to understand carrier-of-carriers VPNs
in general, but deals with IPv4 VPNs. For information about carrier-of-carriers IPv6
VPNs, see “Carrier-of-Carriers IPv6 VPNs” on page 469
.
The carrier-of-carriers VPN enables the customer carrier to provide the following
services for its end customers:
■
Traditional IP services—The customer carrier provides Internet connections for
its customers and uses the provider carrier’s VPN to connect its dispersed
networks.
■
Layer 3 VPN services—The customer carrier provides VPN services for its
customers and uses the provider carrier’s VPN for the backbone that connects
the customer carrier’s VPN sites. This environment is called a hierarchical VPN,
Carrier-of-Carriers IPv4 VPNs
■ 463
Chapter 5: Configuring BGP-MPLS Applications