manualshive.com logo in svg

Juniper JUNOSE, Руководство по настройке

Конфигурационное руководство Juniper JUNOSE - это бесплатный мануал, который поможет вам настроить ваш продукт наилучшим образом. Скачайте его с manualshive.com и следуйте инструкциям для оптимальной работы вашего устройства.

Поделиться
Скачать
background image

show mpls l2-transport

load-balancing-group.......................................495

show mpls l2transport interface..........................562

verifying cell concatenation configuration for

multiple ATM VCs transport.....................562

verifying VCI/VPI range for multiple ATM VCs

transport..................................................562

show mpls next-hop...........................................347
show mpls phb-id...............................................348
show mpls profile...............................................349
show mpls rsvp...................................................350
show mpls rsvp authentication...........................354
show mpls rsvp bfd interfaces............................355
show mpls rsvp counters....................................356
show mpls rsvp hello graceful restart..................358
show mpls rsvp hello instance............................359
show mpls rsvp profile.

show mpls profile

See 

 show mpls commands

show mpls profile

show mpls tunnels......................................361, 498
show mpls tunnels profile.

show mpls profile

See 

 show mpls commands

show mpls profile

show mpls ldp commands

See 

 show ldp commands

show mpls ldp igp-sync.......................................325

show subscriber-policy command..............................624
show vpls connections command..............................632
signaling, VPLS

BGP overview......................................................573
LDP overview......................................................573

single-hop IBGP peers..................................................33
soft clear of BGP sessions.............................................98
speakers, BGP................................................................3

route reflection and............................................148

srefresh messages......................................................231
subscriber policies for VPLS.......................................589
subset of ATM virtual circuits

transportation over a single pseudowire

configuring and...........................................519

summary refresh messages, MPLS.............................231
summary-only keyword (aggregate-address)................61
support, technical

See 

technical support

switch, 802.3ad.........................................................534
synchronization

enabling BGP......................................................133
LDP-IGP..............................................................244

synchronization command.........................................136

T

table-map command

BGP.......................................................................81

targeted hellos and LDP extended discovery..............236
targeted sessions, for VPLS with LDP signaling..........573
technical support

contacting JTAC.................................................xxxv

test bgp ipv6 command.............................................157
test ip bgp neighbor command..........................106, 157
text and syntax conventions....................................xxxiv
timers bgp command...................................................39
topology-driven LSPs, MPLS.......................................241
trace mpls commands

trace mpls ip.......................................................235
trace mpls l2transport.........................................235
trace mpls l3vpn.................................................235
trace mpls rsvp tunnel........................................235
trace mpls vpls....................................................235

transit service..............................................................11
transparent bridging and VPLS...................................571
transport virtual router, configure for VPLS................584
transportation of multiple ATM VCs

over a single pseudowire

and VPI/VCI ranges......................................519

trigger delay...............................................................286
troubleshooting

BGP.....................................................................158

ttl command..............................................................479
TTL processing, MPLS

expiration rules...................................................217
in the platform label space..................................213

tunnel commands

tunnel destination.......................................272, 273

tunnel mpls commands

tunnel mpls affinity.....................................272, 273
tunnel mpls autoroute announce................272, 273
tunnel mpls autoroute metric......................272, 273
tunnel mpls bandwidth...............................272, 273
tunnel mpls description..............................272, 273
tunnel mpls diff-serv phb-id................................304
tunnel mpls fast-rerout........................................287
tunnel mpls lsp retries................................272, 273
tunnel mpls lsp retry-time...........................272, 273
tunnel mpls no-route retries........................272, 273
tunnel mpls no-route retry-time..................272, 273
tunnel mpls path-option..............272, 273, 276, 277
tunnel mpls priority....................................272, 273

tunnels

IPv6 over IPv4 BGP/MPLS VPNs..........................470

U

unicast hop popping, MPLs........................................211
unicast IPv4 address family..........................43, 153, 374
unicast IPv6 address family..........................43, 153, 374
update-source command............................................479
updates, BGP

AS-path filters for..................................................87
in indirectly connected networks..........................31
message explanation..............................................7
minimum interval between sending.....................58

700

■

Index

JUNOSe 11.0.x BGP and MPLS Configuration Guide

Содержание JUNOSE



































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE

Vaisala Veriteq viewLinc 4.0 Administrator'S Manual preview
Veriteq viewLinc 4.0
Бренд: Vaisala Страницы: 168
I.R.I.S. POWERSCAN 9.5 User Manual preview
POWERSCAN 9.5
Бренд: I.R.I.S. Страницы: 182
FARONICS DEEP FREEZER PROFESSIONAL Manual preview
DEEP FREEZER PROFESSIONAL
Бренд: FARONICS Страницы: 31
Blackberry TICKETMASTER - LEARN MORE User Manual preview
TICKETMASTER - LEARN MORE
Бренд: Blackberry Страницы: 7
National Instruments NI-DNET User Manual preview
NI-DNET
Бренд: National Instruments Страницы: 86
Adobe LIVE CYCLE 7.2 - INSTALLING AND CONFIGURING LIVECYCLE FOR JBOSS Manual preview
LIVE CYCLE 7.2 - INSTALLING AND CONFIGURING LIVECYCLE FOR JBOSS
Бренд: Adobe Страницы: 90
FARONICS DATA IGLOO Manual preview
DATA IGLOO
Бренд: FARONICS Страницы: 42
Red Hat CERTIFICATE SYSTEM 7.2 - MIGRATION GUIDE Administration Manual preview
CERTIFICATE SYSTEM 7.2 - MIGRATION GUIDE
Бренд: Red Hat Страницы: 512
Tascam GigaEditor 4 User Manual preview
GigaEditor 4
Бренд: Tascam Страницы: 210
Nikon Digital Cameras Reference Manual preview
Digital Cameras
Бренд: Nikon Страницы: 51
FieldServer FS-8700-84 Driver Manual preview
FS-8700-84
Бренд: FieldServer Страницы: 39
Bay Networks Event Manager Software Manual preview
Event Manager
Бренд: Bay Networks Страницы: 20
Yamaha LS9 Editor User Manual preview
LS9 Editor
Бренд: Yamaha Страницы: 24
MACROMEDIA BREEZE 5-MANAGER Manual preview
BREEZE 5-MANAGER
Бренд: MACROMEDIA Страницы: 306
MACROMEDIA STUDIO 8-EXPLORING STUDIO 8 Manual preview
STUDIO 8-EXPLORING STUDIO 8
Бренд: MACROMEDIA Страницы: 350
ZENEC Z-EMAP50 User Manual preview
Z-EMAP50
Бренд: ZENEC Страницы: 80
Epson PowerLite 1775W Specifications preview
PowerLite 1775W
Бренд: Epson Страницы: 4
Epson PowerLite 1835 Brochure & Specs preview
PowerLite 1835
Бренд: Epson Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды