Juniper JUNOSE, Руководство по настройке

Страница: 397 / 738

Table 58: show mpls rsvp hello instance Output Fields (continued)
Field Description Field Name
Nonzero 32-bit value that represents the sender's hello instance.
The value is maintained on a per-neighbor basis. This instance
value changes only when the sending peer resets, when the sender’s
router reboots, or when communication is lost between the hello
adjacency peers. SrcInstance
32-bit SrcInstance value most recently received from hello
adjacency peer; value is zero when no instance has been received
from that peer DstInstance
Number of hello messages sent Hellos Sent
Number of hello messages received Hellos Received
Number of hello messages suppressed; message generation is
suppressed when a hello request object is received from the
destination node within the hello interval Hellos Suppressed
Number of acknowledgments sent in response to hello requests
received Hellos Acks Sent
Number of acknowledgments received in response to hello requests
sent Hellos Acks Received
Related Topics
■
show mpls rsvp hello instance
Monitoring Status and Configuration for MPLS Tunnels
Purpose
Display status and configuration for all tunnels or for a specific tunnel in the current
router context.
Action
To display the status and configuration for all tunnels:
host1# show mpls tunnels
Tunnel 1 to 0.0.0.0
State: Enabled with Incomplete Config
tunnel not announced to any IGP
(Global) Retry forever
at (Global) interval 5 during Lsp setup if there is route
(Global) Retry forever
at (Global) interval 5 during Lsp setup if there is no route
metric is relative 0
Tunnel 2 to 222.9.1.3
State: Up
Out label 24 on ATM3/0.1 nbr 10.10.11.5
14 pkts, 0 hcPkts, 2156 octets
0 hcOctets, 0 errors, 0 discardPkts
Monitoring Status and Configuration for MPLS Tunnels
■ 361
Chapter 4: Monitoring MPLS