manualshive.com logo in svg

Juniper JUNOSE, Руководство по настройке

Конфигурационное руководство Juniper JUNOSE - это бесплатный мануал, который поможет вам настроить ваш продукт наилучшим образом. Скачайте его с manualshive.com и следуйте инструкциям для оптимальной работы вашего устройства.

Поделиться
Скачать
background image

the router does not enable opening of the VP-level OAM circuits to be transported
transparently on the pseudowire. Because only a subset of the ATM virtual circuits
on an ATM port are carried on the pseudowire, LDP uses the ATM n-to-one VCC cell
transport (0x0009) pseudowire (PW) type instead of the ATM transparent cell transport
(0x0003) PW type in the signaling messages.

Guidelines for Configuring VPI/VCI Ranges of ATM Virtual Circuits

Observe the following guidelines when you specify a single VPI/VCI range of ATM
VCs whose cells need to be transported on the single pseudowire:

■

Use to specify a single VPI/VCI range of ATM VCs whose cells need to be
transported on the single pseudowire.

■

You can configure the 

mpls-relay atm vpi-range vci-range

 command on the

ATM port only after you associated a pseudowire with the port by using the

mpls-relay

 or 

route interface tunnel

 command.

■

You can use this command only on an ATM port (ATM AAL5 over ATM major
interface). When you attempt to run this command on other interface types,
such as ATM subinterfaces or Ethernet interfaces, this setting is not saved and
an error message is displayed.

■

When you run the 

mpls-relay

 or 

route interface tunnel

 command, no default

VPI/VCI range is configured. You must specifically configure the VPI/VCI ranges.

■

The VPI/VCI values that are not part of the specified range can be used for other
existing applications. For example, you can configure an ATM subinterface on
the same ATM port with a VPI/VCI value that is not included by the specified
range specification and use that interface as an IP interface or subscriber interface.

■

If you configured a VPI/VCI range on the shim interface and try to configure an
ATM subinterface with the VPI/VCI value that is encompassed by the VPI/VCI
range specified earlier on the shim interface, an error message is displayed
stating the VPI/VICI range that you are trying to configure is already reserved
and the configuration fails.

■

If some of the VPI/VCI values specified in the range are used for other applications,
the specified range is marked inactive and this setting is saved on the router,
without being used to transport traffic. You must remove the conflicting range,
and remove or reconfigure this range to activate it for transportation of ATM
cells.

■

If the specified VPI/VCI range includes the F4 OAM VCI values, the range is saved.
The F4 OAM VCs are not opened, but the rest of the VCs are opened if they are
not configured for other applications. If some of the VCs other than the F4 OAM
VCs are opened for other applications, the range is marked inactive. You must
specify ranges that do not overlap with the F4 OAM VCI values.

■

You can specify up to four non-overlapping VPI/VCI ranges on the ATM port that
has been associated with the single pseudowire using the 

mpls-relay

 or 

router

interface tunnel

 command.

■

When a VPI/VCI range that you enter overlaps with already specified ranges, the
newly specified range becomes effective.

Multiple ATM Virtual Circuits over a Single Pseudowire Overview

■

521

Chapter 6: Layer 2 Services over MPLS Overview

Содержание JUNOSE



































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE

Garmin eTrex H - Hiking GPS Receiver Owner'S Manual preview
eTrex H - Hiking GPS Receiver
Бренд: Garmin Страницы: 100
ASCOM TEMS VISUALIZATION 7.2 ENTERPRISE Brochure preview
TEMS VISUALIZATION 7.2 ENTERPRISE
Бренд: ASCOM Страницы: 8
IBM E02HRLL-G - WebSphere Partner Gateway... Administration Manual preview
E02HRLL-G - WebSphere Partner Gateway...
Бренд: IBM Страницы: 268
Adobe CAPTIVATE 2 Use Manual preview
CAPTIVATE 2
Бренд: Adobe Страницы: 306
ScanSoft PaperPort Manual preview
PaperPort
Бренд: ScanSoft Страницы: 33
M-Audio Heavy Guitars Quick Start Manual preview
Heavy Guitars
Бренд: M-Audio Страницы: 4
HP PROBOOK 4425S Specifications preview
PROBOOK 4425S
Бренд: HP Страницы: 4
MACROMEDIA FLASH 8-ACTIONSCRIPT 2.0 LANGUAGE Reference preview
FLASH 8-ACTIONSCRIPT 2.0 LANGUAGE
Бренд: MACROMEDIA Страницы: 1378
Teltone TLE-A-01 User Manual preview
TLE-A-01
Бренд: Teltone Страницы: 65
Steinberg TOOLS for CMC Installation Manual preview
TOOLS for CMC
Бренд: Steinberg Страницы: 1
AMX AXD-CV6 Instruction Manual preview
AXD-CV6
Бренд: AMX Страницы: 54
Cabletron Systems CBU-NM User Manual preview
CBU-NM
Бренд: Cabletron Systems Страницы: 108
MACROMEDIA COLDFUSION MX 61-CFML Reference preview
COLDFUSION MX 61-CFML
Бренд: MACROMEDIA Страницы: 806
Native Instruments Scarbee A-200 User Manual preview
Scarbee A-200
Бренд: Native Instruments Страницы: 16
UNIBLUE POWERSUITE 2010 - V1 Product Manual preview
POWERSUITE 2010 - V1
Бренд: UNIBLUE Страницы: 13
Canon EOS 450D Instruction Manual preview
EOS 450D
Бренд: Canon Страницы: 101
SanDisk MUSIC MATCH JUKEBOX 9.0 User Manual preview
MUSIC MATCH JUKEBOX 9.0
Бренд: SanDisk Страницы: 11
FARONICS DEEP FREEZE ENTERPRISE - COMPUTER ASSOCIATES ETRUST ANTIVIRUS... Manual preview
DEEP FREEZE ENTERPRISE - COMPUTER ASSOCIATES ETRUST ANTIVIRUS...
Бренд: FARONICS Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды