Jungheinrich EKS 314, Руководство по эксплуатации

Страница: 89 / 225

0708
.USA
G 8
p) Replace hydraulic hoses after 6 years' operation
Maintenance intervals
Standard =
t
W A B C
Hydraulic
System 6.1 Test operation
t
6.2 Check connections and ports for leaks and damage
t
6.3 Check hydraulic cylinder for leaks and damage and
make sure it is secure
t
6.4 Check oil level
t
6.5 Test hose guide and check for damage
t
6.6 Check ventilation and discharge filter on hydraulic reser-
voir
t
6.7 Replace ventilation and discharge filter on hydraulic res-
ervoir
t
6.8 Replace hydraulic oil and filter cartridge
t
6.9 Test pressure relief valves
t
6.10 Make sure hydraulic hoses are sealed and check for
damage. p)
t
6.11 Test line brake safety device
t
Electrical
System 7.1 Test static charge eliminator
t
7.2 Test operation
t
7.3 Make sure wire connections are secure and check for
damage
t
7.4 Test the operation of the cable guides and check for
damage
t
7.5 Test operation of warning devices and safety switches.
t
7.6 Make sure sensors are fixed, not damaged, clean and
operational
t
7.7 Test operation of instruments and displays
t
7.8 Check contactors and relays; if necessary replace any
worn parts
t
7.9 Check fuse ratings
t
Electric
Motors: 8.2 Check motor attachment
t
Battery: 9.1 Check acid density, acid level and cell voltage
t
9.2 Check terminals are securely attached, and apply
grease
t
9.3 Clean battery connections, make sure they are secure
t
9.4 Check battery cables for damage, replace if necessary.
t
0708
.USA
G 8
p) Replace hydraulic hoses after 6 years' operation
Maintenance intervals
Standard =
t
W A B C
Hydraulic
System 6.1 Test operation
t
6.2 Check connections and ports for leaks and damage
t
6.3 Check hydraulic cylinder for leaks and damage and
make sure it is secure
t
6.4 Check oil level
t
6.5 Test hose guide and check for damage
t
6.6 Check ventilation and discharge filter on hydraulic reser-
voir
t
6.7 Replace ventilation and discharge filter on hydraulic res-
ervoir
t
6.8 Replace hydraulic oil and filter cartridge
t
6.9 Test pressure relief valves
t
6.10 Make sure hydraulic hoses are sealed and check for
damage. p)
t
6.11 Test line brake safety device
t
Electrical
System 7.1 Test static charge eliminator
t
7.2 Test operation
t
7.3 Make sure wire connections are secure and check for
damage
t
7.4 Test the operation of the cable guides and check for
damage
t
7.5 Test operation of warning devices and safety switches.
t
7.6 Make sure sensors are fixed, not damaged, clean and
operational
t
7.7 Test operation of instruments and displays
t
7.8 Check contactors and relays; if necessary replace any
worn parts
t
7.9 Check fuse ratings
t
Electric
Motors: 8.2 Check motor attachment
t
Battery: 9.1 Check acid density, acid level and cell voltage
t
9.2 Check terminals are securely attached, and apply
grease
t
9.3 Clean battery connections, make sure they are secure
t
9.4 Check battery cables for damage, replace if necessary.
t