Jungheinrich EKS 314, Руководство по эксплуатации

Страница: 98 / 225

G 17
0708
.USA
7.2 Measures to be taken during decommissioning
Every 2 months:
– Recharge the battery (see section “Charge the battery“ in chapter F).
IMPORTANT Battery-operated fork lift trucks:
Regular recharging of the battery is very important; otherwise, exhaustive
depletion of the battery caused by self-discharging would occur. Owing to
sulphation, this will result in the destruction of the battery.
7.3 Recommissioning the truck after decommissioning
– Thoroughly clean the fork lift truck.
– Lubricate the fork lift truck according to the lubrication chart
(see section “Lubrication schedule“ in chapter G).
– Clean the battery. Grease the pole screws using pole grease and reconnect the
battery.
– Recharge the battery (see section “Charge the battery“ in chapter F).
– Check if the gear oil contains condensed water and change if required.
– Check if the hydraulic oil contains condensed water and change if required.
– Start up the fork lift truck (see section “Starting up the truck“ in chapter E).
IMPORTANT Battery-operated fork lift trucks:
If switching troubles are experienced in the electric system, spray the
exposed contacts with contact spray and remove any oxide layer on the
contacts of the operating controls by repeated operation.
Q wW
Perform several brake tests immediately after recommissioning the truck.
G 17
0708
.USA
7.2 Measures to be taken during decommissioning
Every 2 months:
– Recharge the battery (see section “Charge the battery“ in chapter F).
IMPORTANT Battery-operated fork lift trucks:
Regular recharging of the battery is very important; otherwise, exhaustive
depletion of the battery caused by self-discharging would occur. Owing to
sulphation, this will result in the destruction of the battery.
7.3 Recommissioning the truck after decommissioning
– Thoroughly clean the fork lift truck.
– Lubricate the fork lift truck according to the lubrication chart
(see section “Lubrication schedule“ in chapter G).
– Clean the battery. Grease the pole screws using pole grease and reconnect the
battery.
– Recharge the battery (see section “Charge the battery“ in chapter F).
– Check if the gear oil contains condensed water and change if required.
– Check if the hydraulic oil contains condensed water and change if required.
– Start up the fork lift truck (see section “Starting up the truck“ in chapter E).
IMPORTANT Battery-operated fork lift trucks:
If switching troubles are experienced in the electric system, spray the
exposed contacts with contact spray and remove any oxide layer on the
contacts of the operating controls by repeated operation.
Q wW
Perform several brake tests immediately after recommissioning the truck.