D*AP4 VAP
4
D*AP4 VAP
front panel view
The front panel of the
D*AP4 VAP
has a 3 line status display and two hidden touch buttons ~ 2.5cm left of the
display.
Button 1
= Home will switch back to the power up display no matter which display level you are in.
Button 2
cycles through the multi level display:
Level 1
Power up display [device type / firmware version]
Level 2
Status
[OK / Error] / Device Name / IP address
Level 3
IN / OUT peak meter
Level 4
Monitor M1 / M2 peak meter
Level 5
Program Out short term loudness
Level 6
Program Out integrated loudness and integration time
Display background
Green = device status OK
color
Red
= device status ERROR
flashing red / green during boot up
The measures of the loudness displays depend on the setup of the respective loudness mode
(see AUDIO PROCESSOR > SETUP > Loudness Mode).
D*AP4 VAP
rear view
For fail safe operation, the
D*AP4 VAP
provides two independent power supplies. These power supplies
operate in load balance. The status of both
PSUs
are combined with other status information and displayed
as backlight color of the front panel display.
STATUS
shows the status of the device controller
INIT /
pressing the INIT button briefly will warm start the device controller.
RESET
Holding down the button until the
STATUS
LED flashes 5 times will initialize the
D*AP4 VAP
to factory default
LAN
RJ45 socket for Ethernet connection to a LAN
USB
USB 2.0 type B socket to connect the built in
USB >> serial
converter with an
external PC
ISO-PWR
lights up if the isolated 5V power supply for GPI /O application is turned on
GPI/O
25pin Sub-D female connector to interface with the 8 optical isolated general
purpose inputs and 8 solid state relay closure outputs
Interface 1
slot to mount one of the optional interface boards (SDI, AES, analog)
SYNC IN
75Ohm BNC connector to connect with external sync sources
WCLK-OUT
75Ohm BNC connector to synchronize external devices to the
D*AP4 VAP
internal word clock
AES / EBU IN
AES3 input
AES / EBU OUT
AES3 output
Interface 2
slot to mount the optional dual high end microphone pre amp module
or the optional dual AES42 module for digital microphones
