D*AP4 VAP
69
Setup GUI – EVENTS – Triggers – Sources
–
Network
Network triggers are based on the
EmBER+
protocol. See
code.google.com/p/
ember
-plus/
for details.
The
D*AP4 VAP
receives such triggers over the TCP/IP network. The triggers are issued by a remote
device or a broadcast automation system. You may assign these triggers to virtual panels, physical buttons
or play list events of Ember+ enabled control instances.
#
The number of the network trigger.
Label
Label of that network trigger.
It appears on the
Configuration
pane as well as in the
EmBER+
tree of the setup interface of a
control instance.
<remove>
will remove a line from the list.
Below is a screen shot of the EmBER viewer tool:
In the EmBER+ tree you go to:
"Device" > controller_dsp > network_trigger > parameters > e.g. "idx_1"
As a value you will receive the trigger name from the
D*AP4
VAP
. In this example it is the first trigger named: "Movie".
Setup GUI – EVENTS – Triggers – Sources
–
Parameters
Above is an example of parameter trigger sources.
<multiple values>
indicates that more than one
value of the parameter "Status" is bound to that trigger source:
If you click into the "Expression 1" field you see two
entries marked greenish, i.e. if one of these values is true,
"Expression 1" is true. You must uncheck both in order to select
a different setting afterwards.
