D*AP4 VAP
45
System Latency:
44.100kHz
48.000kHz
88.200kHz
96.000kHz
Base Latency
AES IN to AES OUT
3,33
3,06
2,12
2,04
Mic IN to AES OUT
4,25
3,9
2,59
2,44
Additional Latencies
Spectral Signature
2,9
2,66
2,9
2,66
Dynamics Look Ahead
2
2
2
2
Limiter Look Ahead Long
1
1
1
1
Base latency consists of 1 ms Limiter Look Ahead Time and all system inherent
processing and input/output delays.
Activating sample rate converters will add additional latency (< 1ms).
Setup GUI – AUDIO PROCESSOR –
Input
You may set the input conditions for both signal paths - voice (V1 / V2) and program (2L / 2R)
via the page embedded tab sheets. The layout of the embedded "Voice" pane differs depending on
the general setup (see SYSTEM > Setup > Voice Channel Mode):
Voice Channel Mode = "2 x Mono"
= "Stereo" (unlinked)
Program pane:
Link
[Unlinked, Linked]
This function will only be available
if the voice channel is set for
"Stereo" (see SYSTEM > Setup > Voice Channel Mode).
Input
[Enable / Disable]
Enables or disables the input section
Mute
[ON / OFF]
Input Gain (dB)
[-80.0 … 0.0 … 20.0]
Polarity
(voice input)
[Normal / Inverted]
Mono
(program input)
[L/R Stereo / L+R Mono / L/L Mono / R/R Mono]
Input HPF (Hz)
[OFF / 20 / 40 / 80 / 120]
Input LPF (Hz)
[OFF / 15 / 20 / 22]
Input Delay Coarse (ms)
[0.0 … 2000.0]
Input Delay Fine (samples)
[0 … 2000]
