D*AP4 VAP
67
Setup GUI –
EVENTS
–
Overview
The
D*AP4 VAP
offers
a sophisticated
event management
system.
The event system performs
Actions.
These
Actions
are built from
Events
.
Actions
may be triggered manually (via the
X*AP RM
1
remote panel
Hotkeys
or from the operator
UI)
,
semi-automatically (triggered by network commands or GPIs) and automatically (triggered by changes of
parameters and/or the internal status) or as a combination of all three.
The overview shows the building blocks of the action management of the
D*AP4 VAP.
The examples further below are taken from the actual set of factory pre-set events based on a number
of useful presets:
A
trigger
is subdivided into a trigger
type
and a trigger
source
. E.g. a GPI is a trigger type while its
number (the physical input) represents the trigger source. Other trigger types have sources which must
be configured, like the names of
X*AP
Hotkeys
or network triggers.
Hotkey Sources
You may assign hotkeys of the
X*AP
remote and / or the
mobile UI
to become a trigger source.
Network Sources
Received via the EmBER+ protocol.
Parameter Sources
Device parameters / status information grouped into
systems and Interfaces.
The triggers will finally be defined by a trigger equation that may be the logical combination of two
trigger sources.
The
D*AP4 VAP
knows five different
event types
:
Preset Events (Profiles)
System / Interfaces / Routing / Audio Processor /
Voice / Program / Monitor
Parameter Events
System / Audio Processor / Measurement
Measurement Events
Pause / Continue / Reset / Reset Max / Start / Pause / Stop
I/O Events
GPOs
Bypass Events
Voice / Program
