D*AP4 VAP
62
Setup GUI – AUDIO PROCESSOR –
Output
The
Output
block allows you to use a
True Peak
limiter,
Mute
and
Attenuate
the output signals from the
DSP, do a mono conversion for stereo channels and add delay. This may be set independently for both the
voice and the program channel.
Link
[Unlinked / Linked]
For voice channel only available if it is in stereo mode.
Limiter
[ON / OFF]
Max True Peak (dBTP)
[-20.0 … 0.0]
Processing Profile
[0 / 1 Live / 2 Speech / 3 Pop / 4 Uni
5 / 6 Classic / 7 / 8 / 9]
Output
[ON / OFF]
Mute
[ON / OFF]
Attenuation (dB)
[-80.0 … 0.0]
Mono
[L/R Stereo / L+R Mono / L/L Mono / R/R Mono]
Output Delay Coarse (ms)
[0 … 2000]
Output Delay Fine (samples)
[0 … 2000]
If the voice channel mode is set to stereo (see SYSTEM > Setup > Voice Channel Mode = Stereo)
a mono circuit will be available for the voice channel as well.