D*AP4 VAP
37
Setup GUI – INTERFACES – Dante I/O Interface –
Inputs
The
DanteController
software gives you an overview of all members of such a
DANTE
network.
You can assign channel labels for the inputs (from the network to the device interface). Those labels will
automatically appear in the
D*AP VAP
and will be displayed there.
Here is a glimpse on the GUI of the
DanteController
:
As an example you see here a
"DAP4-VAP" (name given by the Dante
Controller) that has assigned the labels
V-Proc 3/1 … 3/8 for both the inputs and
the outputs.
Beside a few more devices on that
network, we see the unfolded outputs
of a
DanteVirtualSoundcard
(VSC)
named
"VSC-MARTIN"
on the upper
right hand side.
The top horizontal area shows the
transmitters while the receivers are
shown vertically on the left hand side.
The outputs PCM 0 and PCM 1 from the
VCS are assigned to the
VAP
inputs
V-Proc 3/1 and 3/2 while two outputs
from the "DAP4-VAP" are assigned to
the VSC inputs "01" and "02".
We see the labels assigned by the DanteController software in the "Channel" column:
Inputs
Eight inputs are pre-defined for the
DANTE
interface installed in a
D*AP4 VAP
. They are organized in pairs and the input status is
shown by soft LEDs (green = PCM audio / yellow = non audio/ grey
no audio).
