D*AP4 VAP
40
Setup GUI – INTERFACES –
4 Ch ANALOG I/O Interface
An additional analog interface can be installed in the
Interface
slot.
It provides 4 additional analog line inputs and outputs on a 25pin D-Sub connector:
Enable Relay Bypass
[ON / OFF]
(All Channels)
Power fail bypass relay that may be activated from the GUI
Analog Input Calibration
[0 … 15.0 … 24.0]
(dBu)
(level for digital 0dBFS)
A/D conversion parameter. It defines the analog input level indBu to
reach a digital full scale signal.
Analog Output Calibration
[0 … 15.0 … 24]
(dBu)
(level for digital 0dBFS)
D/A conversion parameter. It defines the analog output level indBU
for a digital full scale signal.