Jung LB management, Руководство пользователя

Страница: 57 / 196

Standard touch dimmer LED
You can switch and dim the lighting with the Standard touch
dimmer LED. As an LED dimmer, the dimmer specifically sets
itself automatically to leading edge or trailing edge phase con-
trol. The dimmer is implemented as 2-wire / 3-wire device and is
supplied with 230 V mains power.
Therefore, operation without neutral conductor is also possi-
ble. Using the operating mode selection button (BAWT) with
LED indicator, you can conveniently adjust the dimmer. The
standard touch dimmer can be installed in a commercially
available device socket (e.g. Kaiser 1055-02) according to
DIN 49073.
Overview of the functions:
− LED dimmer with 2-wire / 3-wire detection (automatic N connection detection)
− 20 – 210 W RLC loads (lower limit: 20 W for 3-wire connection, 50 W for 2-wire)
− 20 – 60 W dimmable electronic transformers with LED
− 3 – 60 W HV LED lamps with leading edge phase control
− 3 – 120 W HV LED lamps with trailing edge phase control
− Basic brightness can be adjusted
− Switch-on brightness or last brightness can be saved
− Connection of satellite units is not possible
− 230 V AC, 50/60 Hz
− Screw terminals
LB MANAGEMENT LIGHT 57