Jung LB management, Руководство пользователя

Страница: 103 / 196

CONTINUOUS ON FUNCTION
The load is switched on manually and continuously until the function is deactivated again.
With this function and using the Clever Config app or a switch on the device, you can prevent
the movement detector not detecting any presence for stationary activities and switching off
the lighting.
Typical usage scenarios are preventing the light being switched off during classwork or when
reading in the bathtub and during house moves in stairwells.
CONTINUOUS OFF FUNCTION
The load is switched off manually and continuously until the function is deactivated again. With
this function and using the Clever Config app or a switch on the device, you can prevent the light-
ing being switched on even if the device detects the presence of a person.
A typical usage scenario is preventing the light being switched on due to movement, e.g. during
film screenings or projector presentations.
0.5 – 5 HOURS CONTINUOUS ON FUNCTION
The load is switched on continuously for a time of 0.5 to 5 hours or until manual deactivation.
The function behaves in principle like the “Continuous ON” function, with the difference that the
function is automatically deactivated after a configurable time and switches to automatic oper-
ation (“AUTO” function). Manual deactivation is thus not strictly necessary.
0.5 – 5 HOURS CONTINUOUS OFF FUNCTION
The load is switched off continuously for a time of 0.5 to 5 hours (or until manual deactivation).
The function behaves in principle like the “Continuous OFF” function, with the difference that the
function is automatically deactivated after a configurable time and switches to automatic oper-
ation (“AUTO” function).
Manual deactivation is thus not strictly necessary.
PULSE OPERATION FUNCTION
If the pulse operation is activated, the load is only switched on for a short time (approx. 0.5
second) when presence is detected. Any longer lasting movement detection results in certain
time intervals for repetition of the switch-on pulse. If the “day operation” setting is also selected,
the movement evaluation is always performed independently of the brightness. This function
can be used in the observer and presence detection modes to monitor other rooms, e.g. whether
a customer is present in the sales areas, for example in combination with a bell.
SWITCH-OFF ADVANCE WARNING FUNCTION
For the switch-off advance warning, the lighting is not switched off immediately at the end of a
movement detection and expiry of the delay time, but not until after a pre-warning by flashing
three times at intervals of 10 seconds (switch insert) or by dimming the lighting (dimming insert).
Any person in the room recognises that the lighting will soon be switched off due to the switch-
off advance warning. The person thus has the opportunity to retrigger the delay time (e.g. by
movement) to prevent any switch-off of the lighting (according to DIN 18015-2).
LB MANAGEMENT LIGHT 103