Jung LB management, Руководство пользователя

Страница: 62 / 196

Universal dimmer LED built-in
You can switch and dim incandescent lamps, HV halogen
lamps and electronic or dimmable inductive transformers for
halogen or LED lamps using the Universal Dimmer LED built-in.
The Mini Universal Dimmer LED built-in is operated using a
2-wire satellite unit with button attachment, push-buttons
with normally open contact or the 3-wire rotary satellite unit.
The Universal Dimmer LED built-in can be installed easily,
quickly and safely in false ceilings and hollow spaces (IP20).
Overview of the functions:
− The device uses the leading edge phase control or trailing edge phase control principle
− The appropriate dimming principle for the load is set automatically or manually
− The set operating mode is indicated by an LED
− Switching on is performed using a soft start that is gentle on the lamp
− Switching on with the last set brightness or with the saved switch-on brightness
− Switch-on and minimum brightness can be saved permanently
− Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest
− Electronic overtemperature protection
− Capacity expansion possible using power boosters.
− Device can be operated without neutral conductor
− Operating mode: HV LED
− 20 – 50 W electronic transformers with LV LED
− 3 – 50 W connected load for HV LED lamps
− 3 – 50 W HV LED lamps with leading edge phase control
− 3 – 100 W HV LED lamps with trailing edge phase control
− Load type: Mixed load
− 20 – 210 W ohmic-capacitive
− capacitive-inductive: not permitted
− 20 – 210 VA ohmic-inductive
− 3 – 50 W ohmic and HV LED
− 3 – 50 W ohmic and compact fluorescent lamp
− 230 V AC, 50/60 Hz
− Screw terminals
62 LB MANAGEMENT LIGHT