Jung LB management, Руководство пользователя

Страница: 88 / 196

You can set the following operating modes:
Universal, R, L, C, LED
− Factory defaults
− Automatic calibration to the load, trailing edge phase control, leading edge phase control
− Load type:
− Incandescent lamps
− HV halogen lamps
− dimmable HV LED or compact fluorescent lamps
− dimmable electronic or inductive transformers for halogen or LED lamps
LED trailing edge phase control
− Connection of inductive transformers is not permitted
− Load type:
− Incandescent lamps
− HV halogen lamps
− trailing edge phase control dimmable HV LED or compact fluorescent lamps
− trailing edge phase control dimmable electronic transformers for halogen or LED lamps
LED leading edge phase control
− Connection of inductive transformers is not permitted
− Load type:
− Incandescent lamps
− HV halogen lamps
− leading edge phase control dimmable HV LED or compact fluorescent lamps
− leading edge phase control dimmable electronic transformers for halogen or LED lamps
Proceed as follows to set the operating mode:
1. Ensure that the load is switched off.
2. Press and hold both buttons simultaneously for longer than four seconds until the LED
indicator lights.
3. Press any of the two buttons so often for less than one second until the required operating
mode is selected.
LED COLOUR MODE
green R, L, C, LED
red LED trailing edge phase control
Blue LED leading edge phase control
The LED indicator lights in the colour of the selected operating mode.
4. Press and hold both buttons simultaneously for longer than one second.
The LED indicator extinguishes and the light is switched on. The operating mode is saved.
The operating mode is not saved and the LED extinguishes if any of the two buttons is not
pressed and held for longer than one second within 30 seconds.
88 LB MANAGEMENT LIGHT