Jung LB management, Руководство пользователя

Страница: 162 / 196

7.4 Pairing the devices
In order to be able to control an LB Management device using the app, the device is first paired
with the mobile device via Bluetooth.
7.4.1 Requirements for the pairing
Ensure that the following requirements are met before you pair the devices with the app:
− The insert is connected and switched off.
− The Bluetooth-capable attachment is attached to the insert and operational.
− The mobile device is in the immediate vicinity of the attachment (in the pairing mode, the
range of the devices is restricted for security reasons).
− The app is installed and started.
7.4.2 Performing pairing
Proceed as follows to pair a device with the app:
1. Call up the device list in the app.
2. Tap on the + symbol at the top right in the device list.
3. Activate the pairing mode on the device.
You activate the pairing mode using the attachment (see “8.2.4 Pairing Universal Timer Blue-
tooth with mobile devices” on page 184 and “4.4.5 Pairing universal automatic switches with
mobile devices” on page 109 ). Further details for this can be found in the respective operat-
ing manual.
The pairing mode is only active for one minute and the blue device LED flashes slowly.
4. Select Start scan in the app.
162 THE CLEVER CONFIG APP