Jung LB management, Руководство пользователя

Страница: 102 / 196

4.4.2 Operating modes and functions
Our automatic switches and presence detectors / ceiling observers provide a variety of functions
to automate the lighting conveniently and as needed. The following chapter gives an overview
of the individual operating modes and functions.
OBSERVER OPERATING MODE
The load is switched automatically in the observer mode, depending on thermal movement and
ambient brightness. In the observer mode, the lighting cannot be switched off using a control
point (switch, button or wireless networking).
Application area
Entrance and passage areas (corridors and stairs), garages, cellars, bathrooms or guest toilets.
PRESENCE DETECTION OPERATING MODE
The load is switched automatically in the presence detection mode, depending on thermal
movement and ambient brightness. In the presence detection mode, the lighting can be
switched off using a control point (3-wire satellite unit, push-button or wireless networking).
Thereby, switching on again during active movement detection in the delay time is suppressed.
In combination with the dimming inserts, you can regulate the lighting, depending on move-
ment, to an individually specified brightness. In this combination, the automatic switch contin-
uously measures the sum of artificial light and daylight on request. If the specified switching
threshold is undercut, the automatic switch switches on the light when movement is detected
and regulates this so that the desired brightness value is achieved. Thus the brightness in the
room always remains constant independently of the amount of incident daylight. This is desig-
nated as constant light regulation.
Application area
Offices, conference rooms, toilets, sports halls, warehouses.
In combination with dimming inserts, particularly for offices, conference rooms and production
areas.
The presence mode is activated and adjusted easily and conveniently by smart phone via
Bluetooth in the Clever Config app.
The following parameters can be adjusted:
− Detection range
− Sensitivities of all sensors (e.g. PIR A – PIR C)
− Brightness threshold
− Fixed or dynamic delay time
− Switch-off advance warning
− Hotel /pilot light function
− Night light function
− Constant light regulation
− Alarm operation
− Walking test
102 LB MANAGEMENT LIGHT