Jung LB management, Руководство пользователя

Страница: 183 / 196

OPERATION 183
YOU WOULD LIKE TO... IMPLEMENTATION FURTHER INFORMATION
... switch the light. − Tap the left button briefly. If the dimming insert is used, the light is switched
to the saved switch-on brightness when switch-
ing on.
... switch on the light with mini-
mum brightness. − Tap the left button at the bottom.
... dim the light brighter. − Tap the left button at the top. The light can be dimmed up to the maximum
brightness.
... dim the light darker. − Tap the left button at the bottom. The light can be dimmed down to the minimum
brightness.
... adjust the brightness / travel
position. − Tap and hold the left button in the
middle.
... save the current brightness
as switch-on brightness. − Adjust the light to the desired brightness.
− Tap and hold the left button at the top
and bottom simultaneously for longer
than four seconds.
The light switches off briefly and immediately on
again. The switch-on brightness is saved.
If a saved brightness is saved again, the dimmer
switches on after every switch-on with the value it
had before the switching off.
... pair the smart phone with
the timer / Bluetooth function. − Press and hold the right button at the
bottom for longer than four seconds.
If you have paired your smart phone with the
Universal Timer Bluetooth, you can program the
settings for light brightness or the position of the
blinds using the Clever Config app.
... activate / deactivate the lock
function. − Press and hold the right button at the top
for longer than four seconds.
The lock function disables the satellite unit opera-
tion and deactivates the Bluetooth function.
Manual operation using the left button at the top
and bottom continues to be possible. The LED
lights red when the lock function is active.
... activate / deactivate the
night mode. − Press and hold the right control button at
the top and bottom simultaneously for
more than four seconds.
In night mode, the LED lights after the button is
pressed for maximum three seconds.
... operate the timer on a differ-
ent insert with the same func-
tion. − Press and hold the left control button at
the top and bottom simultaneously for
more than four seconds to enable the
timer.
The timer is first blocked and the left LED flashes
red. It is enabled by pressing the buttons. The
saved settings are retained.
... operate the timer on an in-
sert with a different function. − Press and hold the left control button at
the top and bottom simultaneously for
more than 20 seconds.
− Then briefly press the left button at the
top and bottom.
The timer is first blocked and the left LED flashes
red. The timer is reset by pressing the buttons
and the saved times and settings are lost.