Jung LB management, Руководство пользователя

Страница: 94 / 196

Proceed as follows to set the operating mode and the basic brightness:
− First, ensure that the load is switched off.
L 1 N
Automatic
Trailing edge phase
control LED
Leading edge phase
control LED
Press and release the button
repeatedly until the desired
operating mode is selected.
Press and hold button .
When the automatic
operating mode is selected,
the calibration to the
load is first performed.
Keep button pressed.
Lighting of the lamp must be recogni-
sable in the lowest dim position.
Optionally change minimum
brightness again:
light switches to the lowest
brightness again and becomes
brighter slowly.
Save settings:
Briefly press button once
LED lights in the colour of the
selected operating mode
LED lights
LED flashes.
Light switches to the lowest brightness and
becomes brighter slowly.
Button for setting
operating mode and
minimum brightness
> 30 seconds time-out cancel / reset
ROTARY DIMMER
UNIVERSAL 1731 DD
TOUCH DIMMER
UNIVERSAL 1711 DE
STANDARD 1710 DE
Select operating mode
Press and hold button
until the LED lights
Release button as soon as the
desired minimum brightness is
reached.
LED lights, operating mode and minimum
brightness are set.
LED extinguishes.
> 30 seconds time-out
settings are saved.
> 4 Seconds
< 1 s
< 1 Second
Set minimum brightness
MINI UNIVERSAL DIMMER LED
1724 DM
94 LB MANAGEMENT LIGHT