Jung LB management, Руководство пользователя

Страница: 184 / 196

184 OPERATION
8.2.4 Pairing Universal Timer Bluetooth with mobile devices
Proceed as follows to pair the Universal Timer Bluetooth with a mobile device:
1. Install the Clever Config app on the mobile device and open the app.
2. Press and hold the Bluetooth button of the Universal Timer Bluetooth for more than four
seconds.
The pairing mode is activated.
3. Follow the instructions in the app.
4. You can set up a password if desired. This will then always be requested when you perform
other pairings. Pairing a total of eight Bluetooth devices is possible with the app so that an
automatic connection between Bluetooth device and attachment is always established when
a device is in the range of the attachment.
You end the pairing mode manually when you keep the Bluetooth button pressed for more than
four seconds. Alternatively, the pairing mode is ended automatically when a pairing has been
successfully completed or there have been no pairings for more than one minute.
Press and hold:
activate night mode
Press and hold:
brighter, move up
Press and hold:
darker, move down
Press and hold:
save settings;
Activate mix-up protection,
factory reset, eNet
pairing mode
Briefly press at
any place:
toggle (On/Off)
Press and hold:
lock function
Press and hold:
memory function