– 44 –
20. 縫い速度一覧表
/
SEWING SPEED TABLE /
NÄHGESCHWINDIGKEITSTABELLE
/
TABLEAU DES VITESSES DE COUTURE /
TABLA DE VELOCIDADES DE COSIDO /
TABELLA VELOCITÀ DI CUCITURA /
缝制速度一览表
La vitesse maximale de couture est indiquée dans le tableau ci-dessous pour différentes conditions de couture. Régler la
vitesse maximale de couture selon les conditions de couture en veillant à ne pas dépasser la vitesse spéci
fi
ée pour les
conditions respectives.
• LU-1508N, LU-1509N
• LU-1508NH, LU-1509NH
Die nachstehende Tabelle gibt die maximale Nähgeschwindigkeit entsprechend den Nähbedingungen an.
Stellen Sie die maximale Nähgeschwindigkeit entsprechend den gegebenen Nähbedingungen korrekt ein, ohne den
jeweils angegebenen Wert zu überschreiten.
• LU-1508N, LU-1509N
• LU-1508NH, LU-1509NH
The maximum sewing speed has been speci
fi
ed in accordance with sewing conditions as shown in the table below.
Set the maximum sewing speed appropriately in accordance with the sewing conditions given taking care not to exceed
the corresponding speci
fi
ed value.
• LU-1508N, LU-1509N
• LU-1508NH, LU-1509NH
交互上下量
縫い目
6mm 以下
縫い目 6mm を
越え 9mm 以下
〜 3 mm 以下 2,500 sti/min
2,000 sti/min
3 〜 4 mm 以下 2,000 sti/min
2,000 sti/min
4 〜 6.5 mm 以下 1,600 sti/min
1,600 sti/min
交互上下量
縫い目
6mm 以下
縫い目 6mm を
越え 10mm 以下
〜 4 mm 以下
2,000 sti/min
1,600 sti/min
4 〜 6.5 mm 以下
1,600 sti/min
1,600 sti/min
Amount of alternate vertical
movement of the walking
foot and presser foot
Stitch length :
6 mm or less
Stitch length :
More than 6 mm
and 9 mm or less
Less than 3 mm
2,500 sti/min
2,000 sti/min
3 mm to less than 4 mm
2,000 sti/min
2,000 sti/min
4 mm to less than 6.5 mm
1,600 sti/min
1,600 sti/min
Amount of alternate vertical
movement of the walking
foot and presser foot
Stitch length :
6 mm or less
Stitch length :
More than 6 mm
and 10 mm or less
Less than 4 mm
2,000 sti/min
1,600 sti/min
4 mm to less than 6.5 mm
1,600 sti/min
1,600 sti/min
Betrag der abwechselnden
Vertikalbewegung von
Lauffuß und Nähfuß
Stichlänge :
maximal 6 mm
Stichlänge :
minimal 6 mm und
maximal 9 mm
Maximal 3 mm
2.500 sti/min
2.000 sti/min
3 mm bis maximal 4 mm
2.000 sti/min
2.000 sti/min
4 mm bis maximal 6,5 mm
1.600 sti/min
1.600 sti/min
Betrag der abwechselnden
Vertikalbewegung von
Lauffuß und Nähfuß
Stichlänge :
maximal 6 mm
Stichlänge :
minimal 6 mm und
maximal 10 mm
Maximal 4 mm
2.000 sti/min
1.600 sti/min
4 mm bis maximal 6,5 mm
1.600 sti/min
1.600 sti/min
Hauteur de mouvement
alternatif vertical du pied
trotteur et du pied presseur
Longueur des
points : Jusqu’
à 6 mm
Longueur des
points : Plus
de 6 mm jusqu’
à 9 mm
Moins de 3 mm
2.500 sti/min
2.000 sti/min
3 mm jusqu’à à moins de 4 mm
2.000 sti/min
2.000 sti/min
4 mm jusqu’à moins de 6,5 mm
1.600 sti/min
1.600 sti/min
Hauteur de mouvement
alternatif vertical du pied
trotteur et du pied presseur
Longueur des
points : Jusqu’
à 6 mm
Longueur des
points : Plus
de 6 mm jusqu’
à 10 mm
Moins de 4 mm
2.000 sti/min
1.600 sti/min
4 mm jusqu’à moins de 6,5 mm
1.600 sti/min
1.600 sti/min
最高縫い速度は、縫製条件により下表のように設定されています。
各条件に合わせて最高縫い速度をセットし、設定値を越えないようにしてください。
•
LU-1508N, LU-1509N
•
LU-1508NH, LU-1509NH