JST AP-K2, Руководство по эксплуатации

Страница: 35 / 36

H:\0 - Quality Documents\2 Department\Tech Serv\Application tooling\Presses\AP-K2\TS009-02 AP-K2 Operation Manual.doc
35
Parts list for the applicator MKS-LS
No. Part Name Part No.
301 Body LS-2301
302 Plate LS-4302
303 Slider LS-3303
304 Positioning spring MA01-214
305 Positioning pin MA01-213
306 Block ring MA01-223
307 Cam LS-4307
308 Shank LS-4308
309 Wire disk LS-4309
310 Insulation disk LS-4310
311 Die plate LS-3311
312 Feed plate base LS-4312
313 Die block LS-4313
314 Retaining bolt LS-4314
315 Feed shaft LS-4315
316 Cam roller LS-4316
317 Pin LS-4317
318 Feed lever LS-4318
319 Feed lever pin LS-4319
320 Adj. Screw 112-223
321 Feed finger spring MA01-348
322 Feed finger pin LS-4322
323 Hook LS-4323
324 Name plate LS-4324
325 Protection rubber LS-4325
330 Hex. Socket head bolt (M6x18)
331 Key (6x6x25 round ends) LS-B331
332 Spring washer (5)
333 Button head screw (M5x12)
334 Hex. Socket head bolt (M5x18)
335 Hex. Socket head bolt (M5x10)
336 Hex. Socket head bolt (M4x8)
337 Pin (2x4)
338 Hex. Socket head bolt (M3x6)
339 Hex. Socket head bolt (M5x50)
340
Rivet (1.5

x5)
341 Hex. Nut (M6, type-1)
342 Spring washer (6)
343 Compressed coil spring LS-B343
344 Tension spring LS-B344
345 Ball plunger LS-B345
346 Hex. Socket head screw (M4x10)