JST AP-K2, Руководство по эксплуатации

Страница: 9 / 36

H:\0 - Quality Documents\2 Department\Tech Serv\Application tooling\Presses\AP-K2\TS009-02 AP-K2 Operation Manual.doc
9
3.3 Mounting the Terminal reel
Step 1
Mount the terminal reel to the reel hanger so
that the terminal barrels are facing the reel
guide.
Step 2
Feed the terminals through the terminal guide.
Mounting the MK-L applicator
Step 3
Push down the tension lever and engage the
hook with the feed plate so that the pressure
pad rises. Feed the terminal strip between the
guide rails.
Step 4
Place the first terminal at the correct crimping
position. Release the hook from the feed plate to
allow the pressure pad to apply pressure on the
strip.
Mounting the MKS-L applicator
Step 3
Rotate the wing bolt clockwise to raise the
pressure plate. Feed the terminal strip between
the guide rails.
Step 4
Place the first terminal in position so that the
terminal is centralised over the anvil. Rotate the
wing bolt counter- clockwise to lower the pressure
plate so that pressure is applied to the terminal.