JST AP-K2, Руководство по эксплуатации

Страница: 18 / 36

H:\0 - Quality Documents\2 Department\Tech Serv\Application tooling\Presses\AP-K2\TS009-02 AP-K2 Operation Manual.doc
18
Step 3
Firmly grip the fly-wheel on both sides and pull off
the end of the shaft. There are seven ‘stick rollers’
inside the clutch and they may fall out when the
fly-wheel is pulled off the shaft, so take care not to
lose any.
Step 4
Remove any traces of old grease from all
components of the clutch mechanism and
sparingly lubricate all the clutch components with
fresh grease.
Specified Grease: Multemp PS no.1 manufac-
tured by Kyodo Yushi Co Ltd.
Do not use general purpose grease because
the clutch will not function correctly.
Contact JST Technical Services Department
for details of grease stockists.
Step 5
Assemble the clutch ensuring that the clutch lever
is engaged correctly with the clutch cam, as in
photo A.
If the clutch is assembled as in photo B, it will not
be possible to re-mount the flywheel onto the
shaft.
PHOTO A
PHOTO B