JST AP-K2, Руководство по эксплуатации

Страница: 33 / 36

H:\0 - Quality Documents\2 Department\Tech Serv\Application tooling\Presses\AP-K2\TS009-02 AP-K2 Operation Manual.doc
33
Parts list for the applicator MKF-L
No.
Part Name Part No. No. Part Name Part No.
101 Body NF-2101 138 Stroke adj. Screw MA01-334
102 Slider NF-3118 139 Punch NF-4122
103 Copper bar
(3.8

x2mm)
140 Die plate NF-3149
104 Positioning spring MA01-214 141 Bracket NF-4133
105 Positioning pin MA01-213 142 Spring post NF-4159
106 Insulation disk NF-4121 143 Returning spring MA03-349
107 Spring MA01-216 144 Spring NF-4126N
108
Steel ball (3

)
109 Wire disk MA01-211 146 Keep plate NF-4125
110 Shank MA01-217 147 Crimper anvil base NF-4105
111 Cam NF-4168 148 Feed plate NF-2129*
112 Guide shoe NF-4140 149 Support pin NF-4163
113 Tension spring NF-4117 150 Needle bearing
K12x15x13 NF-B164
114 Fulcrum bolt NF-4115 151 Collar NF-4154
115 Support pin MA01-343 152
E-shaped ret.ring (9

)
116 Spring post NF-4116 153 Guide block NF-4165
117 Plate (L) NF-4114 154 Holder block NF-4147
118 Plate (R) MA02-103 155 Pressure plate
119 Feed shaft MA01-338 156 Guide plate (R)
120 Ring nut MA01-341 157 Guide plate (L)
121
E-shaped ret.ring (6

)
158 Pin NF-4109
122 Lever block MA01-340 159 Feed finger
123 Adj. Bolt MA01-339 160 Shear blade
124 Cam roller MA01-308A 161 Shear blade anvil (A)
125 Cam roller shaft MA01-337A 162 Shear blade anvil (B)
126 Feed lever (A) MA01-342 163 Tension spring NF-4110
127 Feed lever pin MA01-344 164 Spring post NF-4108
128 Feed lever (B) NF-4138 165 Spring post NF-4111
129 Feed finger pin MA01-347 166 Wire block
130 Feed finger spring MA01-348 167 Insulation block
131 Feed adj. Plate NF-4137 168 Block ring MA01-225
132 Spring post NF-4139 169 Crimper (A)
133 Hex. Nut (m4,type-1) 170 Crimper (B)
134 Stroke adj. Shaft MA01-331 171 Die holder ring
135 Stroke adj. Bearing MA01-332 172 Crimper anvil (A)
136 Hook NF-4113 173 Crimper anvil (B)
137 Hex. Nut MA01-333 174 Finger holder
Note: * will vary (A,B,…..) depending on the terminal Note :

: mm dia.