TylerRiggingTools.com
Cable Puller Instructions
2 Ton & 4 Ton Models
TylerRiggingTools.com
Free Spooling
1
Move the handle spring to
the free spool position so the
pawl can disengage from the
drum gears. (Fig. 1 & 2)
2
Depress and hold the catch latch. (Fig. 3)
3
Pull out the amount of cable needed.
Lifting / Tensioning a Load
1
Move the handle spring to the
tensioning position so the pawl can
engage the drum gears. (Fig. 4 & 5)
2
Ratchet the handle until the load is
at the desired position.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Safety Warnings:
THIS PRODUCT IS NOT DESIGNED FOR OVERHEAD LIFTING.
• Read and understand owner’s manual before operating cable puller.
• This product is designed for pulling, lugging, and lifting BELOW shoulder height.
• Do not exceed the rated capacity.
• Do not use handle extensions (cheater pipes).
• Inspect cable, hooks, and cable puller before each use. DO NOT use if damaged.
• Never leave a suspended load unattended.
• For more information concerning additional operation, inspection, maintenance, safety standards
and regulations, read ANSI/ASME B30.21.
