1
2
3
4
5
6
1
2
4
5
6
YT-8253
YT-8252
YT-8251
YT-8250
YT-8256
YT-8255
YT-8254
1. casing
2. soldering tip
3. heating element
4. cable and plug
5. soldering tip
fi
xture
6. protecting sleeve
PROPERTIES OF THE TOOL
The soldering tool has been designed for the purpose of soldering metals with tin and
lead binders for soft soldering. The tool has been designed exclusively for household
applications and must not be used professionally, i.e. in plants and for pro
fi
t-making
purposes. A correct, reliable and safe functioning of the tool depends upon appropriate
operation, and therefore:
Before work with the tool, read the complete instruction
and keep it.
The supplier will not be held responsible for any damage and injuries
which occur as a result of inappropriate applications of the tool, failure to observe safety
regulations and the recommendations speci
fi
ed in these instructions. Improper applica-
tion of the tool will also cause cancellation of any guarantee rights due to incompliance
with the sales contract.
EQUIPMENT
The soldering tool is provided complete and has no additional accessories.
TECHNICAL DATA
Parameter
Unit of
measurement
Value
Catalogue number
YT-8250 YT-8251 YT-8252 YT-8253
Power supply mains
voltage
[V]
~230
Power supply mains
frequency
[Hz]
50
Rated power
[W]
30
40
50
60
Heating time
[min]
5
5
5
5
Working temperature
of the soldering tip
[
O
C]
300
320
340
350
Maximum temperature
of the soldering tip
[
O
C]
400
420
440
450
Dimensions
of the soldering tip
[mm]
Ø3,8 x
70,8
Ø4,9 x
75,5
Ø5,9 x
76,5
Ø5,9 x
76,5
Durability
of the soldering tip
[soldering
points]
60 000
Mass
[kg]
0,04
0,06
0,07
0,07
Electric insulation class
I
Parameter
Unit of
measurement
Value
Catalogue number
YT-8254
YT-8255
YT-8256
Power supply mains
voltage
[V]
~230
Power supply mains
frequency
[Hz]
50
Rated power
[W]
15
25
35
Heating time
[min]
3
3
3
Working temperature
of the soldering tip
[
O
C]
300
320
350
Maximum temperature
of the soldering tip
[
O
C]
400
420
450
Dimensions
of the soldering tip
[mm]
Ø6,4 x 42,7 Ø6,4 x 42,7
Ø8,0 x 57
Durability
of the soldering tip
[soldering
points]
60 000
Mass
[kg]
0,04
0,05
0,07
Electric insulation class
I
GENERAL SAFETY CONDITIONS
NOTE!
Get acquainted with all the instructions below. Failure to observe them may
lead to an electric shock,
fi
re or injuries. The notion of electric tool used in the instruc-
tions applies to all the tools which are powered with electric current, both wire tools
and wireless ones.
OBSERVE THE FOLLOWING INSTRUCTIONS
Place of work
The place of work must be properly illuminated and clean.
Disorder and poor il-
lumination may be a cause of accidents.
Do not work with electric tools in explosive
environments, or those which contain in
fl
ammable liquids, gases or vapours.
Electric tools generate sparks, which may cause a
fi
re in case of contact with in
fl
am-
mable gases or vapours.
Do not allow children and outsiders to the place of work.
A lack of concentration may result in a loss of control over the tool.
Electric safety
The plug of the power supply cable must
fi
t the mains socket. Do not modify
the plug. Do not use any adapters whatsoever in order to adapt the plug to the
socket.
Unmodi
fi
ed plug which
fi
ts the socket reduces the risk of an electric shock.
Avoid contact with grounded surfaces, such as pipes, heaters and refrigerators.
Grounding of the body increases the risk of an electric shock.
Do not expose electric
tools to precipitation or humidity.
Water and humidity which gets into the electric
tool increases the risk of an electric shock.
Do not overload the power supply cable.
Do not use the power supply cable in order to carry the tool or to connect and
disconnect the plug from the mains socket. Avoid contact of the power supply
cable with heat, oils, sharp tools and moving elements.
Damage to the power sup-
ply cable increases the risk of an electric shock.
In case work is realised outside
closed areas, it is necessary to use extension cords designed for applications
outside closed areas.
Using a correct extension cord permits to reduce the risk of
an electric shock.
Personal safety
Commence work in good physical and psychological conditions. Pay attention
RESISTANCE SOLDERING TOOL
