JRC Alpatron AlphaMidiCourse Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 82

background image

Is activated when a failure is generated in the communication from the control unit to the master compass.

8. GPS communication break.

Is activated when the serial signal from GPS stops, or GPS operation stops. When this alarm is activated, operate
according to Corrective Measures GPS Communication Failure on page 51.

Note This alarm is activated only when "GYRO" is selected as the system selection and "GPS" is selected
as the ship's speed input system or the latitude input system.

9. GPS communication data failure.

Is activated when an failure is generated in the serial signal from GPS. When this alarm is activated, operate
according to Corrective Measures GPS Communication Failure on page 51.

Note This alarm is activated only when "GYRO" is selected as the system selection and "GPS" is selected
as the ship's speed input system or the latitude input system.

10. System internal communication failure (1) (Option).

Is activated when internal communication from the external heading sensor signal processing unit, built into this
system, to the Gyro Compass operation processing unit (in this system) has stopped.

Note When "External heading sensor" is selected as system, operate according to Corrective Measures
External Heading Sensor Communication Failure on page 51.

11. System internal communication failure (2) (Option).

Is activated when a failure is generated in internal communication from the external heading sensor signal processing
unit, built into this system, to the Gyro Compass operation processing unit (in this system).

Note When "External heading sensor" is selected as system, operate according to Corrective Measures
External Heading Sensor Communication Failure on page 51.

12. Master compass heading failure.

Is activated when a failure is generated in the monitor signal of the master compass heading.

13. External heading sensor communication stop.

49 | Operation

«
...
47
48
49
50
51
...
»

Содержание Alpatron AlphaMidiCourse



















































































Отзывы:

Нет отзывов

Похожие инструкции для Alpatron AlphaMidiCourse

TruePoint HMR3500

Бренд: Honeywell Страницы: 6

Бренд: Tritech Страницы: 52

Бренд: Tacktick Limited Страницы: 14

Бренд: Tacktick Страницы: 27

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды