JRC Alpatron AlphaMidiCourse, Инструкция по установке и эксплуатации

Страница: 27 / 82

ICIF
pwb S2 Standard
Setting Details Function Read
Timing Remarks
NO.5 [OFF] NO5.[OFF] NO6.
[OFF] ; 1sec NO5.[ON] NO6.
[OFF] ; 200msec
NO.6 [OFF]
Serial Signal
Transmit
Frequency
IEC61162-1 ed.2
NO5.[OFF] NO6.
[ON] ; 100msec NO5.[ON] NO6.
[ON] ; Invalid
(1sec)
Start Up
NO.7 [OFF] Do Not Touch -
NO.8 [OFF] System Select
Information
Contact [OFF] : no [ON] : yes Start Up
¹ Standard set to off, for pendulum ferry use external interface!
ICIF
pwb S3 Standard
Setting Details Function Read
Timing Remarks
NO.1 [OFF] Timer Start Up [OFF] : no [ON] : yes Start Up
NO.2 [OFF] Talker ID of "ROT"
Sentence [OFF] : "HE" [ON] : "TI" Start Up
NO.3 [OFF] NO3.[OFF],
NO4.[OFF] : Max
30.0˚/
min.
[NO3.[ON] NO4.
[OFF] : Max
300.0˚/
min
NO.4 [OFF]
Rate of Turn Scale
for Analog meter
NO3.[OFF],
NO4.[ON] : Max
300.0˚/
min.
[NO3.[ON] NO4.
[OFF] : Do Not
Set
Start Up
Valid at time of external sensor
(standard) selection NO.5 [OFF] Ban or permission
of an "RoT"
Sentence Output
[OFF] : disable [ON] : enable
Start Up
NO.6 [ON] Alphatron or other [OFF] :no [ON] : AlphaMidiCourse Start Up
NO.7 [OFF] Unit check mode [OFF] : no [ON] : yes for factory
inspection only Start Up
NO.8 [OFF] Buzzer stop
contact output [OFF] : no [ON] : yes Start Up
IOPT
pwb Standard
Setting Details Function Read
Tuning Remarks
NO.1 [OFF] Do Not Touch -
NO.2 [OFF] For AGI-80 or not [OFF] : For normal TG-8000/8500
[ON] : For AGI-80 Start Up
NO.3 [OFF] Able/Disable for
HDG sentence
output [OFF] : Able to output [ON] : Disable
to output Start Up
Alarm detection
time for main
power Start Up NO.4 [OFF]
Fail / Power Unit
fail
[OFF] : 300ms [ON] : 2sec
27 | Installation Instructions